answersLogoWhite

0

because the power still are in circuit of the motherboard and you have to drain the system

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What would cause a computer not to power up with a relatively new power supply?

Power supplies are the most common failure point in a PC. Check for these:Broken Power supply unit (even if nearly new)Lack of power in the cableBlown fuse20 or 24 pin ATX power connector not seated correctly4 pin CPU power cable not seated correctlycable from front panel power switch to motherboard connector disconnected


What danger is posed to a technician by opening a power supply even after it has been unplugged for an extended period of the time?

The capacitors in the power supply may still be 'charged' - and give off a powerful shock if touched.


Where do you get the code for 2001 sunfire after the battery cables have been disconnected?

You dont and even after they are hooked back up the code would have most likely been erased after the battery was disconnected.


Is used to prevent the effect of power fluctuation in the power supply on your computer and works for a specific period of time even there is no power.?

computer


Even when the power supply is switched on why will a dodgem car not move until the pedal is pressed?

because the motor has to turn on


If a sub woofer has been switched OFF for a few years . will there any current generating from the it even if it is disconnected from the power sources such as the AC and stereo system?

A sub woofer speaker is not a current generating device.


What is used to prevent the effect of power fluctuation in the power supply on your computer and works for a specific period of time even there is no power.?

computer


What should a complete circuit have a minimum of?

a power supply (eg: battery) and a load (eg: resistor) even a piece wire shorting two terminals of the power supply is a closed circuit


Why the case and power supply must match the motherboard?

Case: Your motherboard must be able to fit in your case and must support your motherboard size (correctly placed standoffs). Power Supply: You can't have a shortage of power or else your power supply will get overloaded and "die", or even possibly explode for that matter.


Can you use a 300ma power supply in place of a 400ma supply?

Yes, you can use a 300mA power supply in place of a 400mA supply, but it may not provide enough current for the device to operate properly. If the device requires 400mA and only receives 300mA, it may underperform, malfunction, or even be damaged due to insufficient power. It's important to ensure that the power supply meets or exceeds the current requirements of the device for safe and effective operation.


What are some exceptions to the rule of always being grounded when you work with PCs?

When working inside a monitor, inside a power supply or inside another high voltage peripheral such as a laser printer or scanner. The reason is that these components contain a powerful electrical charge even after they are disconnected from power. You don't want to be grounded because you provide yourself as a conduit for the voltage to discharge through, which would suck.


Can an armadillo still use their sex organs even if they are disconnected?

no