You need to plug the ethernet cable into a port located on the back of the console, near the hard drive.
If it has an internet port for a ethernet cable plug it into the box and into the back of the PS3. If it is supposed to be WiFi then use you PS3 to search for the signal and then use auto to establish the connection using the PS3 network connections
Yes, the cable that came with the xbox 360 was just a standard ethernet cable.
you plug the ethernet cable in the back of the xbox and then you hook it up to the computer modem.
You can connect a printer using Ethernet if the printer has an ethernet jack. If not you can purchase a used HP Jet Direct box on E-Bay for $10, which has a parallel connector that works for older printers. The printer connects to the jet direct via parallel cable, then a CAT 5 (Ethernet) cable to a hub, switch or router. If you are using Windows choose Add Printer , Local Printer attached to this computer, create new port, arrow down to TCP/IP port and type in the address from your router (192.168.1.X).
A LAN is a "Local Area Network". Your cable box is providing one or more Ethernet ports by means of which you can access the Internet.
on the xbox 360 its at the back of the xbox 360. there is a hdmi port put the hdmi cable in the xbox 360 and slot it in the hdmi port on your hdtv
yes you do its a grey cable that comes included in the pack
yes. you can use an xbox 360 wireless network adaptor. or use an ethernet cable and insert it into the back of your router or modem.
normally a router will come with a power cord,software if needed,and an ethernet and usb cable.
Turn off ps3 plug in ethernet cable to back of ps3 and cable box. then hit the reset button on cable box.Power on ps3 and go to network settings, internet connections, select easy and that should be it. I have charter myself and this worked for me.
Install the antennae outside your home on the roof. Connect a coaxial cable from the antenna to the "ANT" port on the back of the Captive Works box in your house. Connect a coaxial cable to the "TV/VCR" port. Connect the other end to the television.