0
What else can I help you with?
Why open loop amplifier configration are not used liner application?
Because they are not linear.
Why we don't prefer open loop configuration in case of linear circuit?
A: OPEN LOOP means the gain can be very high without the means to control the loop chances are that it will either saturate or oscillate
Why open loop configuration of opamp not used in linear applications?
Open loop means max amplification of an amplifier. if the open loop is very it will probably oscillate since there is not a feedback to control it or it will go to one rail of the other saturated
Why it is unsuitable for operational-amplifier to connect in open loop?
In open loop configuration the gain of the amplifier will be infinite, which in turn produces only square wave output.
The gain of an operational amplifier will be maximum?
A: the gain will be maximum at the open loop configuration and decrease as frequency increases
Can Android open all application?
it can only open these files txt,apk and configuration settings it cannot open exe,msdox,ppt,html or php
Is opamp a linear device?
A: It should be that is the normal operating mode. To be linear it strongly depends on negative feedback to maintain it into that linear region. By itself without any feedback it is very unstable due to the hi gain open loop availability
Open loop and close loop system in injection moluld machine?
loop checking is perform before cable termination..the difference between a close loop and open loop is,tha close loop has a feedback while the open loop has not.
Is it possible to use op amp in open loop mode?
Yes, but it is not very useful in open loop mode. In open loop mode, unless you happen to be very lucky (as in extraordinarily lucky, meaning you won't be) the output will be pegged to one of the two rails. The op-amp will be operating in saturated mode instead of linear mode, and its response time will suffer. You could also damage the op-amp.
What is the definition of open loop process control?
it is when a control loop is open and processing
What is sensitivity of open loop control system?
The sensitivity of an open loop control system is always 1, it is due to no feedback involved in open loop.
A loop with a break in it that prevents current from flowing is called?
an open circuit.
