0
What else can I help you with?
Why voltage gain is high in op amp?
A practical opamp is designed to approach the characteristics of the ideal opamp as closely as possible. The open loop voltage gain of an ideal opamp is infinite, so while this is actually impossible to achieve practical opamps are built with as high an open loop voltage gain as possible.
How does differentiator opamp works?
A differentiator op-amp circuit produces an output voltage that is proportional to the rate of change of the input voltage. It uses a resistor and capacitor in its feedback loop, where the capacitor allows the circuit to respond to changes in the input signal. When the input voltage changes, the capacitor charges or discharges, causing a corresponding change in output voltage that reflects the input's instantaneous rate of change. This configuration is particularly useful in applications requiring signal processing, such as in analog signal differentiation or in certain control systems.
Why it is unsuitable for operational-amplifier to connect in open loop?
In open loop configuration the gain of the amplifier will be infinite, which in turn produces only square wave output.
The gain of an operational amplifier will be maximum?
A: the gain will be maximum at the open loop configuration and decrease as frequency increases
How many types hydraulic systems there?
There are primarily two types of hydraulic systems: open-loop and closed-loop systems. Open-loop hydraulic systems operate without feedback and are typically simpler, used in applications where precise control is not critical. Closed-loop systems, on the other hand, incorporate feedback mechanisms for improved control and efficiency, making them suitable for applications requiring precise movement and pressure regulation. Additionally, hydraulic systems can be classified based on their design, such as single-acting and double-acting systems.
Why open loop configuration is not used for linear application?
becouse it is nt linear ... basicaly closs loop is linear .. and its loops
Is opamp a linear device?
A: It should be that is the normal operating mode. To be linear it strongly depends on negative feedback to maintain it into that linear region. By itself without any feedback it is very unstable due to the hi gain open loop availability
Why voltage gain is high in op amp?
A practical opamp is designed to approach the characteristics of the ideal opamp as closely as possible. The open loop voltage gain of an ideal opamp is infinite, so while this is actually impossible to achieve practical opamps are built with as high an open loop voltage gain as possible.
Why we don't prefer open loop configuration in case of linear circuit?
A: OPEN LOOP means the gain can be very high without the means to control the loop chances are that it will either saturate or oscillate
How does differentiator opamp works?
A differentiator op-amp circuit produces an output voltage that is proportional to the rate of change of the input voltage. It uses a resistor and capacitor in its feedback loop, where the capacitor allows the circuit to respond to changes in the input signal. When the input voltage changes, the capacitor charges or discharges, causing a corresponding change in output voltage that reflects the input's instantaneous rate of change. This configuration is particularly useful in applications requiring signal processing, such as in analog signal differentiation or in certain control systems.
Is time a loop?
Time is not a loop in the sense that it repeats in a continuous cycle. Instead, time is a linear progression from past to present to future.
Why open loop amplifier configration are not used liner application?
Because they are not linear.
How 2prevent hacking?
Their is no way, all hacking is is finding loop holes in the configuration and exploiting them.
How can you create a secure tie loop in a rope for various applications?
To create a secure tie loop in a rope for various applications, you can use a simple method called the "bowline knot." This knot forms a strong loop that won't slip or come undone easily. To tie a bowline knot, make a small loop in the rope, then pass the end of the rope through the loop, around the standing part of the rope, and back down through the loop. Tighten the knot by pulling both ends of the rope. This creates a secure loop that can be used for tying objects, securing loads, or other applications where a strong and reliable loop is needed.
Why it is unsuitable for operational-amplifier to connect in open loop?
In open loop configuration the gain of the amplifier will be infinite, which in turn produces only square wave output.
The gain of an operational amplifier will be maximum?
A: the gain will be maximum at the open loop configuration and decrease as frequency increases
What is the switch loop wiring diagram for a lighting circuit?
A switch loop wiring diagram for a lighting circuit involves connecting a switch to the power source and the light fixture in a loop configuration. The switch controls the flow of electricity to the light fixture.
