0
What else can I help you with?
Why would a negative wire melt off battery?
there is not a proper grounding wire mounted to the body of the car or truck.
Why would your ground wire melt the pigtails on your back up lights?
Something is shorted to ground on that circuit
Would plastic melt if touched to a live wire?
No, Plastic is not conductive! I other words plastic can not conduct electricity therefore it can not produce resistance, and resistance is what you need to produce heat. and that heat would melt the plastic. Now if you touch a "live" wire to metal and that metal was grounded ( for example to a cold water pipe) then you would be completing the circuit, then that piece of metal would heat up very rapidly and eventually melt! of-course the smart person would not do this but if you where not so smart be prepared to get burned!!!! BE SMART!!
Why would a wire nut melt?
Moisture causing corrosion on the nutted wires causing a high resistance on the splice which in turn creates heat. Sometimes on conditions like this the wire insulation can melt back up to six inches. Close to the splice the insulation can actually get so brittle that it will fall off of the wire.
What would cause the positive connector wire to melt on a 2000 ford focus?
A positive wire is grounded out to the frame someplace on the car. Best take it to someone else to get it fixed.
How is metal wire made?
You melt the metal and pour it into a thin mold the size of the wire you want.
Can you recycle wire cages?
Yes. They melt it down and recycle it.
What is meant by the term fusing current?
Fusing current for a wire is the current at which the wire will act like a fuse (melt).
Why does ice not melt completely when there is a wire gauze?
The wire gauze provides a barrier between the ice and direct heat, preventing efficient heat transfer to melt the ice completely. Instead, the heat is dispersed more evenly across the surface of the ice, causing it to melt slowly. This phenomenon is due to the wire gauze acting as a thermal insulator.
What is a thin metal wire that is designed to melt when the electric current is to large?
A fuse.
Why would a computer shut down whenever a CD is burned or ripped to a computer the computer shuts down however the power light remains on why would this happen?
That may be because there may be a virus or there can be a problem with the C.P.U wire.
Why is it dangerous to replace a fuse with a wire that bypass the fuse?
The wire may not melt and break if an unsafe current is produced.
