0
According to this , yes it will work
http/forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/Voltage-Supply-Range-of-the-Power-Adaptor-and-the-cable/td-p/181204
<<>>>
The above answer was taken from forums, not the most reliable source of information.
No, a 125 volt adapter can not be used in a 220 volt outlet.
What else can I help you with?
Can a 7a 125v power cord be used in China which is 240v?
No, using a 7a 125v power cord in a 240v outlet in China could cause damage to your device or pose a safety hazard. You should use a power cord that is rated for at least 240v to ensure safe operation.
How do you charge the Kindle?
you put the adapter in to its spot then pulg the cord into an outlet
Can you plug 15A 125V rated US power cord into 230V socket outlet?
No, it is not safe to plug a 125V rated power cord into a 230V socket outlet. The power cord is not designed to handle the higher voltage and could result in damage to the cord or connected devices, and pose a safety hazard. It is important to always match the voltage ratings of power cords and outlets to prevent damage and ensure safe operation.
Will 10a 125v power cord power a10a 250v?
no
Can you use your laptop to the power outlet in UK?
Depends on the PSU, the box on the cord. If it says 120-240 volts, then you can, but you also need an adapter as the outlet itself is different.
What can an LS-18 7A 125V Longwell cord be used for?
The cord can be used with Dell Alienware Laptop adapters.
How do you modify a 3-phase electric range for a 4-phase outlet?
First off, it is not a 3-phase range. It is a single phase 110/220V range with a cord lacking a ground pin. Also, it is not a 4 phase outlet. It is a modern 110/220V outlet with a ground pin. To upgrade your range, go th the hardware store and buy a new 4-prong 50A 110/220V cord with a ground. Remove the old cord, and wire in the new cord. If the old cord was flat without a color code, the two outside wires are the hots (red and black on the new cord) and the center wire is neutral (white on the new cord). If the neurtal lug is bonded to the chassis, break the bond. The green wire in the new cord grounds the chassis. Connect the green wire to a convient screw in the chassis, if a dedicated green ground screw is not provided.
How can I connect a 4-wire appliance to a 3-wire 220v outlet without compromising safety or functionality?
To connect a 4-wire appliance to a 3-wire 220v outlet without compromising safety or functionality, you will need to install a 4-wire cord and plug on the appliance and ensure the outlet is properly grounded. This may require hiring a professional electrician to make the necessary modifications to the outlet and appliance to ensure safe and proper operation.
What type of power cord is required for a device that operates on 220v?
A device that operates on 220v typically requires a power cord with a voltage rating of 220v and a compatible plug type for the specific country or region where the device will be used.
Is a 125v extension cord ok to use on a 1100w microwave oven?
Yes. It should be a 'heavy-duty' extension cord, rated for 15A or 20A .
What is the difference between an extension cord and a computer cord?
An extension cord is a long power cord that plugs into an outlet and receives with an outlet. A computer cord just uses one long cable to transfer power to the computer from the outlet.
Can you plug a 3 prong extension into a 110 volt outlet?
Yes, a 3-prong extension cord can be plugged into a 110-volt outlet as long as the prongs match the outlet. Just make sure the extension cord is rated for the appropriate voltage and current to avoid any electrical hazards.
