Yes, provided the outlet has a three element receptacle. The third prong is ground. If you use an adapter that connects three prongs to a two slot outlet there is a shock danger.
My question is WHY did you replace a four prong dryer plug with a three prong! 220 volt Electric dryers require two hot legs, a neutral and a system ground wire. Sounds as though you shunted one of the hots or the neutral. You need to install a four prong plug of the same configuration and wire it exactly as the original.
No; the third prong is there to protect you from stray voltage and it grounds the wiring. Although you could probably find an adaptor, it would be much safer for you to have an electrician rewire the outlets so they can accept a three prong plug.
No, the 220 v and 110 v systems are designed to use a different pin layout for the plugs and sockets, to avoid possibly dangerous cross-connections. The two voltages can not be mixed and equipment for one system cannot be used on the other without a transformer.
No. First off, the plug will be different. And even if you replace the plug, it won't work right on the wrong voltage
Usually 3. Why two different size prong? Two for the prongs and a third for the ground.
A 4 prong generator plug requires a 240-volt outlet with four slots to be safely connected.
On a 240 volt outlet, such as a dryer outlet: G is Ground, W is Neutral, X and Y are the two Hot legs.
Yes.
no
On a 240 volt outlet, such as a dryer outlet: G is Ground, W is Neutral, X and Y are the two Hot legs.
Yes
Yes.
My question is WHY did you replace a four prong dryer plug with a three prong! 220 volt Electric dryers require two hot legs, a neutral and a system ground wire. Sounds as though you shunted one of the hots or the neutral. You need to install a four prong plug of the same configuration and wire it exactly as the original.
The bulb will be about half as bright.
Yes
No; the third prong is there to protect you from stray voltage and it grounds the wiring. Although you could probably find an adaptor, it would be much safer for you to have an electrician rewire the outlets so they can accept a three prong plug.
No, the 220 v and 110 v systems are designed to use a different pin layout for the plugs and sockets, to avoid possibly dangerous cross-connections. The two voltages can not be mixed and equipment for one system cannot be used on the other without a transformer.