0
What else can I help you with?
What are the main subwoofer cables?
The main subwoofer cables can go by quite a number of various names. The port name that they plug into is called RCA. One example of these cables is the Mediabridge Ultra Series.
What cable do you need for subwoofer?
To connect a subwoofer, you typically need a subwoofer cable, often referred to as an RCA cable. This cable usually has a single RCA connector on each end, designed to carry low-frequency signals from the receiver or amplifier to the subwoofer. If your subwoofer and receiver support it, you may also use a balanced XLR cable for a more robust connection, especially in professional audio setups.
How do you set up a Sony Speaker System Sub-woofer SS-WS550?
To set up the Sony SS-WS550 subwoofer, first connect it to your audio source using an RCA cable; plug one end into the subwoofer's input and the other into the corresponding output on your receiver or amplifier. Next, plug the subwoofer's power cord into an electrical outlet. Adjust the volume and crossover frequency on the subwoofer to match your main speakers for optimal sound. Finally, position the subwoofer in your room, ideally in a corner or near a wall, to enhance bass response.
How do you connect a sub woofer to a head unit without a RCA input?
To connect a subwoofer to a head unit without RCA inputs, you can use a high-level (speaker-level) input adapter, which converts the speaker wire signal from the head unit into a signal suitable for the subwoofer. Alternatively, you can use a line output converter (LOC) that attaches to the speaker wires, allowing you to create RCA outputs for the subwoofer. Once connected, adjust the gain and crossover settings on the subwoofer or amplifier to ensure optimal sound quality.
How do I hookuppioneer htp 100-sw to Pioneer 75w and times5 (rms) accurate imaging amplifier?
To connect the Pioneer HTP-100SW subwoofer to the Pioneer 75W RMS amplifier, use an RCA cable. Plug one end of the cable into the subwoofer output of the amplifier and the other end into the LFE input of the subwoofer. Ensure the subwoofer's volume and crossover settings are adjusted to your preference for optimal sound quality. Finally, power on both devices and test the setup for balanced audio output.
Panasonic SB-WA930 active subwoofer.How do you hook up never hooked a home sub uop let alone an active subwoofer.Bought at a yard sale so mite not work.power lite works but I hear no noise to know?
This specific subwoofer, can't be add to all audio systems, it does not rca in, like normal sub woofer, i have a active subwoofer sb-wa930 , it has a special cable , that contains about 24 pins, that connects to a 5 cd player sa-ht930.
FIXED fixed fixed?
I was looking to connect a an amplifier to my onkyo HT-R8230 sound system. When I RCA cables form the sub out to my amp in I am left with a constant low tone through my subwoofer. I'm guessing because the sub out is meant for the active subwoofer that it came with it will not send the right signals or something of the sort? Any and all help is much appreciated!
How do you hook speaker wire to RCA I have 2 wires from a stock sub and ones positive and ones negative I need to convert those into rca's how?
RCA connectors are used for line level signals. The RCA subwoofer output on you home theater receiver cannot drive a bare speaker. You will need an amplifier to boost the RCA line level signal up to speaker level.
What would an active subwoofer be used for?
An active subwoofer in our time can be used to make some money, you could possibly sell it and make some profit. You can also make money off it by renting it to people
How do you connect a subwoofer to your amplifier?
Depends, Self powered or not? home or car? XLR or RCA? Speakon or TRS JAck? or simple speaker cable.
What does rca stand for when referring to rca jacks?
RCA stands for the Radio Corp. of America. The jack was their invention and has been around for a long time. A din plug was invented in Germany and it stands for Deutches Institut fur Normung. The plug is widely used now but does not hold a patent.
How do you connect a subwoofer to your m-audio studiophile AV 40s?
To connect a subwoofer to your M-Audio Studiophile AV 40s, first check if your subwoofer has a dedicated LFE input or speaker level inputs. If it has an LFE input, use a standard RCA cable to connect the subwoofer output from your audio source (like a mixer or audio interface) to the subwoofer. For speaker level inputs, use speaker wire to connect the AV 40s' output to the subwoofer's input, and then connect the subwoofer's output back to the AV 40s. Ensure the subwoofer's crossover frequency is set appropriately for optimal sound integration.
