When you want to clean pliers, make sure that you have oil (not cooking oil), rag and the pliers that you are cleaning. You may want to work above a piece of newspaper.
Then open the pliers and put oil at the top, sides and front. Wait for five minutes and clean with sand paper.
Answer There is nothing wrong with using cooking oil for lubing tools if you have to -it's better than nothing.
Yes, if you wrap the tooth in gauze first. Make sure the pliers are clean and sterilized.
Keep the pliers dry and clean and use light oil on the pivot point about once a month.
There are electricians straight pliers, wiring pliers, long nose pliers, angled long nose pliers, side cutting pliers, parallel jaw pliers, locking pliers, aircraft twist locking pliers, channel lock pliers, oil wrench pliers, water pump pliers and fencing pliers. -I have each of these and I'm sure there are many more kinds.
Electrician's pliers, long nose pliers, brake pliers and snap ring (or circlip) pliers.
Assuming you have a standard wire coat hanger, you can either use a hacksaw or a pair of sturdy side-cutting pliers. Some ordinary pliers have little recesses near the jaw that can also be used but they tend not to make clean cuts.
yes, pliers are levers : )
Pliers are a lever
If tweezers are not available, you can use a pair of clean and sanitized small pliers or a needle to remove small objects or splinters from your skin.
Howe pliers is used in Orthodontics as a utility pliers and can be used in wirebending and banding the molars.
They are called locking pliers or locking jaw pliers. Sometime clamping pliers.
Side-cutters or diagonal cutting pliers should be used to cut wires, cables, and other materials where precision cuts are required. They have a cutting edge that is angled to provide a clean cut close to the surface.
"I used the pliers to cut the wire"