http://skyscan.info/content/index.php?option=com_content&task=view&id=39&Itemid=40
Skyscan model 87315 does not have a manual on the Skyscan website. Use the manual for model 87310 and skip over the temperature transmitter instructions. The instructions for the setup buttons on the back work for 87315. I received the following in an email from the SkyScan website customer service. The clock referenced has a different frame, but the same functions and displays. You can use the manual for model 86730 this is the upgrade from your model and the functions are the same.
http://skyscaninfo.com/content/manuals/33-model-31310t.html
To set the time on the Skyscan atomic clock model 26600, press the "SET" button until the time zone is displayed on the screen. Use the "+" and "-" buttons to adjust the time zone, and press "SET" again. The clock should then synchronize with the atomic time signal and display the correct time.
To find instructions for the Skyscan atomic clock model 87315, you can visit the manufacturer's website and look for a downloadable manual in the support section. You can also try contacting the manufacturer directly for a digital or physical copy of the manual. Additionally, you may find user-generated guides or videos online that provide step-by-step instructions for setting up and using the clock.
This doesn't answer the question. We can't refer them to another link. Please revise, remove this comment, and resubmit. The instructions for the SkyScan Atomic clock model 87801 can be found here in the form of a .pdf document: skyscanatomicclocks.com/manuals/87800-01.pdfAlso included in this manual is the 87800 model; this manual covers both clocks.
To set the time on the Skyscan Atomic Clock model 86722ALU, first, insert the required batteries. Make sure the clock is in the Time Zone mode. Press and hold the SET button until the time zone begins flashing. Use the + and - buttons to adjust the time to your correct time zone. Press the SET button to confirm.
To turn off the alarm on the model 31269 Skyscan atomic clock, press the "ALARM" button until you see the alarm icon disappear from the display. If your clock has a snooze function, pressing the "SNOOZE" button will silence the alarm temporarily, but you'll need to deactivate the alarm entirely by using the "ALARM" button. Make sure to check the manual for any specific instructions related to your model.
To set the time on the Skyscan atomic clock model 86715, first, ensure the clock is plugged in and powered on. Press the "SET" button, then use the "HOUR" and "MINUTE" buttons to adjust the time. After setting the correct time, press "SET" again to confirm the changes. The clock should then display the updated time.
The SkyScan Atomic Clock model 86715 receives radio signals from atomic clocks to stay accurate. It automatically adjusts for Daylight Saving Time and has a large display for easy reading. It also features an alarm with snooze function.
http://www.lacrossetechnology.com/8117it/manual.pdf This has the instructions for your atomic clock.
To turn off the alarm on the Skyscan atomic clock model 38229-1, press the "ALARM" button until you see the alarm time flash on the display. Then, press the "SET" button to deactivate the alarm. You should see the alarm icon disappear, indicating that the alarm is off. Be sure to check the owner's manual for specific instructions related to your model.
In the SkyScan atomic clock, the terms "ALM" (almanac) and "SNZ" (signal noise zeroing) relate to the clock's ability to maintain precise timekeeping. The ALM data provides information about the positions of satellites, which is essential for accurate time synchronization via GPS. Meanwhile, SNZ is a technique used to reduce noise in the clock's signal, enhancing stability and precision. Together, these functions ensure that the atomic clock delivers reliable and accurate time measurements.