You can plug in the LED light on a mist maker machine using a fog machine.
As far as I know, you can only install plug-ins on Windows Live Movie Maker version.
Hmmm....try pullin the plug from the wall that might make it go away......lol
You have to plug it in.
To change a light bulb in a Singer 247 sewing machine, first, ensure the machine is unplugged for safety. Locate the light cover, usually at the top of the machine, and carefully remove it by unscrewing or sliding it off. Take out the old bulb by gently twisting it counterclockwise, then insert the new bulb by twisting it clockwise until secure. Finally, replace the light cover and plug the machine back in to test the new bulb.
You have to plug it into a computer/diagnostics machine for it to reset. Also, you will see that the code for your problem is fixed, or not.
Take it to auto zone, they have a machine thru plug into the computer of the car and it will tell them why its on
It is the port, where a diagnostic machine can be hooked up. The diagnostic will read codes from your vehicles computer. For instance if your check engine light comes on, you can plug the diagnostic machine into the data port and it will tell you why the check engine light came on so that you can get it fixed.
It actually has no on/off switch and no light on it. You only need to plug it in and push the foot pedal to start sewing.
Buy a plug wrench.
an adapter can help in this case.
The Future Machine is in Professor Pendulum's lab on Main Street. To power it up, go left and down to where there is a large plug, and plug it in. Then climb up and jump into the machine.
where do you plug in a diagnostic machine on a 1992 eagle summit?