0
What else can I help you with?
How do you program a uniden bearcat BC 370 CRS scanner?
easy to program
How do program a uniden 30 channel10 band radio bearcat BC60XLT-1?
Scanner codes
How do you find a uniden bearcat bc142xl scanner manual?
You don't. The good news, though, is that all Uniden/Bear at scanners in the 14X series are nearly identical in features and operation, so you can follow the link below to download/print the manual for the BC148XLT: http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC148XLT%20%28Manual%29.pdf Bill B
What are the codes for a uniden bearcat bc148xlt scanner?
it takes a 8 digit number example 1550.0100 palestine Texas
How do you remove programmed frequencies from a uniden bearcat bc 560xlt?
Try programing in 000.000, if that does not work then you can just lock the frequency out or program over it.
Where can you find police frequencies for Jasper county Texas for a uniden bearcat scanner?
See the related link below for Jasper County, Texas.
What is the voltage of a uniden bearcat sportcat sc 150 charger adapter?
INPUT: AC 120V 60Hz OUTPUT: DC 12V 200mA
How do you reset a Uniden bearcat scanner?
To reset a Uniden Bearcat scanner, first turn off the device. Then, while holding down the 'Hold' and 'Function' buttons, turn the scanner back on. Continue to hold the buttons until the display shows "Initializing" or "Resetting." This process will restore the scanner to its factory settings, erasing any stored frequencies and settings.
How do you get uniden bearcat bc147xlt off lockout?
To unlock a Uniden Bearcat BC147XLT scanner, press the "L/O" (Lockout) key while the channel you want to unlock is selected. If the channel is locked out, the display will show "L/O." Pressing the "L/O" key again will remove the lockout. Make sure to repeat this process for any other locked channels you wish to unlock.
How do you program a uniden bearcat handheld scanner model bc245xlt?
To program a Uniden Bearcat BC245XLT handheld scanner, first power on the device and press the "MANUAL" button to select a channel. Use the keypad to enter the desired frequency, then press "E" to save it. For trunked systems, press the "TRUNK" button, select the trunk type, and enter the control channel frequency. Finally, use the "SCANNER" button to start scanning the programmed frequencies.
How do you a program a uniden bearcat bc72xlt?
Follow the link to download/print the manual for your scanner. It will walk you through the programming process. http://www.uniden.com/pdf/BC72XLTom.pdf
How do you program a uniden bearcat bc60xlt?
To program a Uniden Bearcat BC60XLT scanner, first, turn on the device and select the frequency band you want to program. Use the "Manual" button to enter the desired frequency, then press "Enter" to save it to the selected memory channel. You can also use the "Search" feature to find active frequencies within a range. For more advanced programming, consult the user manual for details on using the memory banks and scanning modes.
