A remote starter switch that most mechanics have in their tool box or a simple jumper wire will work.
To begin with, check the box or manual of the remote car starter to see if the product is compatible with your car. Use a soldering iron to connect wires following the manual. If there is more than one wire for ignition, accessory or the starter, use a relay to connect them.
LOOK UNDER THE HOOD, ON THE DRIVERS SIDE, RIGHT ABOUT THE WHEEL WELL, THERE SHOULD BE A BLACK BOX, IT WILL HAVE RELAYS IN IT, THATS WHERE YOU SHOULD FIND IT.
The starter relay is located in the power distribution box under the hood. Swap it with the heater blower relay (same part number) to check it. This Ford vehicle does not have a remote starter solenoid mounted on the firewall/inner fender. The starter solenoid is mounted directly to the starter itself.
how to program a universal rca remote to a dtv craig converter box
In a 1999 Honda Civic, the starter relay is typically located in the under-hood fuse box, which is situated near the battery. To access it, open the fuse box cover and look for the relay labeled "Starter" or "Start." If you're having trouble locating it, refer to the diagram on the inside of the fuse box cover for guidance.
If it's not like the one that came in your wii box, it's a fake.
It is usaully in the glove box on most cars check in there, it should be a little round button
what is the code to program a RCA remote and a motorola cabel box
On a 1995 GMC Sonoma, the starter relay is typically located in the under-hood fuse and relay box, which is situated near the battery. To access it, open the hood and look for the rectangular black box; the relay will be inside this box, along with other fuses and relays. You may need to refer to the diagram on the cover of the fuse box to identify the specific starter relay.
To program a Philco converter box using a universal remote while the box is off, first, ensure the universal remote is compatible with the converter box. Press and hold the "TV" or "Device" button on the remote until it lights up, then release it. Enter the code for the Philco converter box, which can usually be found in the remote's manual or online. Once the correct code is entered, the indicator light will turn off, and you can test the remote by turning the converter box on and checking if it responds to the remote commands.
Rca remote