code nomber for sanyo-t.v
The codes relate to the tv set and not the remote. Google the set or sanyo and you will get the code. You then need a universal remote to programme to that code or the instructions for the Philips remote to see if that can be reprogrammed. Again Google Philips and the make.
I had a similar problem and used the code for the Sanyo FXWK. The two remotes seem similar and the codes for that worked on my FXWJ remote. You can find the codes here: http://remotes.com/store/codes_original.html . Hope this helps.
Yes, the Sanyo DP32671 TV is compatible with the GE 25008-v5 universal remote. To program the remote, you can use the code search feature or manually enter the correct code for Sanyo TVs, which can usually be found in the remote's instruction manual. If programming is successful, you should be able to control the basic functions of your TV with the universal remote.
I need the tv code using a Philips unversal remote for a sanyo tvwww.urc.Philips.com/Phillips official website...
It is the tv that has the set code. Then you need to program the remote to that. Google the manufacturer and make.
chunghop 139c
One of these should work.... 1004, 1048, 1049, 1073, 1080, 1162, 1169, 1180.
A few different DISH Network remote codes for your Sanyo TV that you can try & one should successfully program your remote are, 590, 090, 720, or 683.
To program a Universal Remote New Star 96 1018 for a Sanyo TV, you can try using the following codes: 004, 009, 010, or 011. To input the code, turn on your TV, press and hold the "TV" button on the remote until the LED blinks and then stays on. Enter the code, and if successful, the LED will turn off. If not, try the next code until you find one that works.
If the channel buttons on your Dish remote are not working after programming it to your Sanyo TV, it could be due to an incorrect programming procedure or a mismatch in the remote control settings. Ensure that the remote is properly synced to the TV by following the correct code entry process. Additionally, check if the remote is set to the TV mode instead of the satellite mode. If the issue persists, resetting the remote and reprogramming it may help resolve the problem.
To set up a Sanyo TV with a Dish satellite receiver, you typically use the remote control for the Dish receiver to access the TV's input settings. Generally, the code for programming a Dish remote to a Sanyo TV is either 711 or 748. You can also refer to the Dish Network's official website or user manual for a complete list of compatible codes. Remember to ensure that the TV is set to the correct input source to receive the satellite signal.