0
What else can I help you with?
What two cables connect to the hard disk?
There are two cables that connect to the floppy drive in a desktop computer.There is a four pin power cableThere is a ribbon cable that has a part twisted end (the twisted end connects to the floppy drive).
How can you tell the difference between the hard drive data cable from the floppy drive data cable?
1. A floppy cable will almost always contain a small "twist" in it, in which a port of the wires are turned in reverse.2. A floppy cable has 34 pins. A PATA hard drive cable has 40 pins.
How can you tell which side of a hard drives data cable connects to pin 1 on the drive?
These PC cables have a notch or key on one side of plug and can only be inserted in one orientation in connector socket. If the notch is missing, you may also look for a small arrow mark on pin 1 of the cable plug. Other marking is that the ribbon or flat cable some times will have the first wire in a different color compared to rest of the cable. - Ron Patton
How can cars drive?
the gas is ignited in the engine creating a small explosion a small scale) pushing the cylinder upwards turning a wheel which connects to the wheels
When using an 80-conductor cable-select cable the drive nearest the motherboard is the?
Answer: When using an 80-conductor cable-select cable, the drive nearest the motherboard is the master, and the drive farthest from the motherboard is the slave. You can recognize a cable-select cable by a small hole somewhere in the the data cable or by labels (master or slave) on the connectors. -CompTIA A+ Guide to Hardware, Managing, Maintaining, and Troubleshooting Fifth Edition 2010 copyright - Jean Andrews, Ph.D.
What is the purpose of a bicycle brake noodle and how does it contribute to the overall functionality of the bicycle brake system?
A bicycle brake noodle is a small, curved metal tube that connects the brake cable to the brake caliper. Its purpose is to allow the brake cable to move smoothly and flexibly as the brake is applied, ensuring that the brake pads can grip the wheel effectively. The noodle helps to reduce friction and improve the overall responsiveness and efficiency of the bicycle brake system.
Where is the fusible link 03 dodge diesel?
Its the big black wire coming off the battety going into a smaller wire that connects to the alternator. the big black cable connects to a wire 4x as small that wire is the fusible link.
On which side of the starter solenoid does the positive battery cable go to on a 1984 ford mustang v8?
There should be 2 large terminals on your starter, with one already having a small cable running to the inside of the casing. The battery cable connects to the other (opposite) one.
What is the purpose of the brake cable barrel end and how does it contribute to the functionality of a bicycle's braking system?
The purpose of the brake cable barrel end is to secure the brake cable to the brake lever. It helps to maintain tension in the cable, allowing for precise control and responsiveness when braking. This small component plays a crucial role in ensuring that the braking system functions effectively and efficiently on a bicycle.
Floppy disk drive not ready in DOS 1st boot device in BIOS?
The most common cause of problems accessing a floppy disk drive is the orientation of the cable leading from the drive to the motherboard. Along one edge of the cable will be a red indicator, either a solid or a dashed line running the length of the cable. At both ends this red side of the cable needs to line up with pin #1 in the connector. On the motherboard this will usually be indicated by a small number 1 printed at one end of the socket. At the drive end this will be indicated either by a number or a small arrow or triangle.
Your speedometer does not work on your fiat brava any advice?
Check that the drive cable ends haven't rounded or the small drive unit where it plugs into the gearbox has not stripped, some are plastic.
What are the different parts of a bike brake cable?
A bike brake cable consists of three main parts: the inner cable, the housing, and the end caps. The inner cable is the metal wire that connects the brake lever to the brake caliper. The housing is the protective covering that surrounds the inner cable and helps guide it along the bike frame. End caps are small metal pieces that secure the cable to the brake lever and caliper.
