0
What else can I help you with?
When an automotive battery is fully charged the sulfuric acid and water mixture will have what specific gravity?
when a battery is fully charged , the amount of sulfuric acid mixed with the water is sufficient to give a specific gravity of about 1.3 when battery is discharged to 50 percent, the specific gravity reading should be 1.2 any specific gravity reading that's less than 1.1 usually indicates a dead batteryThe answer isC. 1.3.
When an automotive battery is fully charged the sulfric acid and water mixture will have a specific gravity of about?
When a battery is fully charged, the amount of sulfuric acid mixed with the water is sufficient to give a specific gravity of about 1.3. The answer is C. I found this on Page 78 of the Mechanics Study Unit of Physical Science (Penn Foster). One of the uses of a hydrometer is to measure the condition of electrolyte solution in a storage battery of the type used in a car. When a battery is fully charged, the amount of sulfuric gravity of about 1.3.
When an automotive battery is fully charged the sulfuric acid and water mixture will have what specific gravity of about?
About 1.265 (taken from Wikipedia)
What is the reading on a hydrometer for a fully charged battery?
A fully charged lead-acid battery typically reads between 1.265 and 1.280 specific gravity on a hydrometer. For lithium-ion batteries, specific gravity measurements are not applicable, as they use different technology. It's important to ensure the battery is at a stable temperature for accurate readings, as temperature can affect the hydrometer's measurements.
How do you check specific gravity of acid in a car battery?
To check the specific gravity of acid in a car battery, you'll need a hydrometer. First, ensure the battery is fully charged and then carefully remove the vent caps. Insert the hydrometer into the electrolyte solution, squeezing the bulb to draw in the liquid, and then release it to allow the float to settle. Read the specific gravity measurement on the scale; a higher value typically indicates a fully charged battery, while a lower value suggests it's discharged.
Is the battery fully charged?
Yes, the battery is fully charged.
What are indications that lead acid battery is fully charged?
There are two measures, cell voltage and specific gravity of the electrolyte. Cell voltage is the simplest to measure. For most automotive, flooded cell (having liquid electrolyte) batteries, 12.6 volts is considered full charge, although it is typical to have 13 volts or a bit over. The specific gravity of a fully charged battery, measured with a hydrometer, is 1.265.
What is specific gravity of discharge battery?
The specific gravity of a discharged lead-acid battery typically ranges from about 1.100 to 1.150. This measurement indicates the density of the electrolyte (sulfuric acid solution) compared to water. A lower specific gravity suggests that the battery is discharged, while a higher value (around 1.250 to 1.300) indicates a fully charged state. Regularly checking specific gravity helps assess battery health and charge levels.
What is measured by Specific gravity of a lead acid cell?
Specific gravity of the electrolyte in the lead acid cell or battery (assuming that the battery is not of the sealed type) is often used as a measure of its STATE OF CHARGE. Sure we can do the same with a multimeter but the above method is more accurate.
How do you know when the spynet video watch is fully charged?
When it is charging the screen reads: Battery Charging. When it is fully charged it reads: Battery Charged.
Does a fully charged battery weigh more than an empty battery?
No, a fully charged battery does not weigh more than an empty battery. The weight of a battery remains the same regardless of its charge level.
What is the relative density of a fully charge battery?
The relative density of a fully charged battery is typically around 1.28 to 1.3 for lead-acid batteries. This measurement can vary based on the type of battery and its specific composition.
