use magnavox code 1053
Waths the remote code for pixel
try code 1071. It worked for a sharp aquos 60" tv.
1343 is the Visio code.
Most Seiki tv use Samsung parts try codes from them
I just used a Zenith code 1255 for my Toshiba HDTV and it worked! Good Luck!
Press the button of what you want to program (cable,tv,or aux). Hold the set up button until your button of choice flashes twice. Enter your code (I had to enter a additional 1 to the beginning of my code). The button of choice should then flash once and it is now ready. I used this on a maxent 50' monitor
1004 worked for me.
With a universal remote... ;) --Sillypinkjade-- ----
TVs work with remotes because TVs have an IR sensor on the front bezel for receiving a signal from a remote control. Your Asus monitor is NOT equipped with such a sensor to receive commands from a remote control. It will NEVER work with TV remotes. Not in a million years. Don't even think it.
Code 1023 worked for an Insignia 22", 32" and 55". Code 1023 also works for the Insignia 42" LCD 1080p, 120 Hz (FYI - This code is not listed in the guide that A,T & T includes with its remotes) Code 1033 has also been suggested.
To program a U-verse remote for a Bose Cinemate system, you typically need to use the code 321 or 332. First, turn on your Bose system, then press and hold the "TV" and "OK" buttons on the remote until the TV key blinks twice. Next, enter the code and press the "Enter" button to save it. If these codes do not work, you may need to try other codes listed in the U-verse remote manual or use the code search feature.
To control an Onkyo 636 receiver with an U-verse remote, you can try the code 31063. If that doesn't work, other codes to try include 31714 and 31499. To program the remote, press and hold the "TV" button until it turns green, then enter the code. If successful, the green light will blink and turn off; if not, repeat the process with a different code.