1343 is the Visio code.
Try the codes for Emmerson. 1468 worked for me.
TVs work with remotes because TVs have an IR sensor on the front bezel for receiving a signal from a remote control. Your Asus monitor is NOT equipped with such a sensor to receive commands from a remote control. It will NEVER work with TV remotes. Not in a million years. Don't even think it.
Try 11381
Waths the remote code for pixel
use magnavox code 1053
http://alanweinkrantz.typepad.com/3screens/2007/12/how-to-program.html or try http://www.ehow.com/how_4786661_program-att-uverse-remote-control.html
According to Magnavox, there are no known codes for the u-verse remote for certain models, including Projection TV Model 50ML8105D. I use My original Magnevox Remote for the TV and the uverse remote for the Channels and on-off.
Yes, a Vizio remote can control an AT&T U-verse cable box if it is programmed correctly. Most Vizio remotes have a universal remote function that allows you to set it up to work with various devices, including cable boxes. You may need to enter a specific code for the AT&T U-verse box or follow the pairing instructions provided in the remote's manual. If successful, you should be able to change channels and control other functions of the cable box with the Vizio remote.
To control an Onkyo 636 receiver with an U-verse remote, you can try the code 31063. If that doesn't work, other codes to try include 31714 and 31499. To program the remote, press and hold the "TV" button until it turns green, then enter the code. If successful, the green light will blink and turn off; if not, repeat the process with a different code.
try code 1071. It worked for a sharp aquos 60" tv.
Try 2338...worked for me