phillips cl034 manual Paste this into your browser to view the entire remote manual. You're welcome :)
http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/1500115_AD_EN.pdf
press and hold code search button then select the device u want to use then press power code search start blinking looking for the right code then push ok
how to program my tv with the RCA D 770 - universal remote control which has no code search button
Use the set button just below the volume down key
Press "Code Search" button for 5 seconds. When the red light is on release the "Code Search" button and keep pressing the "shut down" button until your TV/DVD turns off. When it turned off press "Enter" button and complete the process.
a button on your emerson remote control
Yes, you can program a TV to a universal remote even if the TV itself has no visible power button. You can typically do this by using the remote's setup function and entering the specific code for your TV brand. If you don’t have the code, many universal remotes offer a code search feature that cycles through potential codes until it finds one that works. Additionally, some TVs can be programmed via the remote’s learning function if it supports it.
I was able to use the code search on a GE 4 function remote, I found the remote for $5 at Big Lots. I started the search with the TV on and let it run until it shut the TV off. Steps I took, press and hold the setup key - then release, press and release the TV button, press and release the power button, after TV turns off then press the #1 button to lock in the code. This remote does almost everything but the sleep button.
First Hold the set button down a few seconds then at the same time without letting go of the set button, hold down the device button ie TV. Then release the set button, then the device button. Then press the set button once to start the search. The device you are sinking the remote with should switch off. If it does press the device button to store the code. If not then restart your search until it does.
To program the remote with the codes, firstly, turn on the electronic gadget for which you are going to use this remote, by pressing the On and Off button. Then locate the Setup or the Code Search key on the remote control. These buttons may vary from remote to remote. Just hold on the setup or the code search key for 5 - 10 seconds or till the light on the remote
To get codes for your GE universal remote to operate your off-brand TV, first consult the user manual that came with the remote, as it often contains a list of codes for various TV brands. If you don’t have the manual, you can usually find a digital version online on the manufacturer's website. Additionally, you can try the "Code Search" feature on the remote by holding the "TV" button until it stays on, then pressing and releasing the "Search" button repeatedly until the TV turns off. Finally, if all else fails, you can also check websites that specialize in universal remote codes for more specific guidance.
Universal remote control codes for the Sony DAV-DZ170 home theater system typically include 1004, 1005, and 1006. To program your universal remote, enter the code followed by the "Enter" button. If these codes do not work, consult your remote's user manual for additional codes or try the code search feature.
Philips universal remote controls can operate audio and video devices of any brands. You have to enter the code of the device in the universal remote control. The codes are usually found in the manual or you can search through the library of codes by using the Code Search button of the remote.