The correct Answer is 35 degress celsius
Defective temperature gauge or defective temperature sensor?
Low coolant, check when engine is cold.
When my check engine light comes on, it is caused by the temperature sensor not working. As soon as the light comes on, my temperature drops to cool. If the light goes out, the temp gauge returns to normal.
Stop immediately, open the bonnet (hood), let the thing cool down, check the coolant and top up if necessary.
The most accurate method for measuring tire pressure on a bicycle using a bicycle pressure gauge is to first ensure the gauge is properly calibrated, then attach it securely to the valve stem of the tire and read the pressure displayed on the gauge. It is important to check the pressure when the tire is cool and adjust as needed for optimal performance and safety.
THERE IS NO GAUGE CHECK IT WHEN ITS COOL TAKE THE CAP OFF AND LOOK IN DO NOT DO THIS IF THE ENGINE IS WARM IT WILL SCALD YOU
If the temperature gauge shows high but the engine is cool, it may indicate a malfunction in the gauge itself or a faulty temperature sensor. Another possibility is a problem with the wiring or connections leading to the gauge, causing incorrect readings. It's essential to investigate further to avoid potential engine damage or overheating issues. Checking the coolant level and inspecting for leaks can also help diagnose the problem.
Bad groung and or bad sending unit.
because the engine in that car does not cool down
change the temp switch first and if its the same as before then someone has taken the thermostat out which causes the engine to stay cool.
then you better stop and let it cool down
Its just there to let you know that the engine is running at a normal temperature and isn't overheating. If your engine starts to overheat, you can tell then do something about it. Pull over and check, let it cool before proceeding to a garage, before it is too late and the engine is destroyed.