answersLogoWhite

0

I would say to heat it up a bit and use a razor blade scraper very GENTLY to scrap it off then clean it with something like cleaner for a smooth top stove.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

When was Pittsburgh Plate Glass Enamel Plant created?

Pittsburgh Plate Glass Enamel Plant was created in 1937.


How do you remove melted plastic from an enamel baking tray?

You might try heating the plate first. Hopefully the plastic will become warm and melty enough to rub away with a cloth. Steel wool might also be an option, but you take the risk of scratching the enamel surface.


What is a plaque?

An engraved metal or enamel plate which is affixed to a wall. Sometimes the plate is affixed to a wooden background which is affixed to the wall.


Want to continental plate in an oceanic plate Clyde the oceanic plate will be pushed down into the mental melted in a process called what?

Subduction


How do I do steel enamel pre-treatment?

In the enamel manufacturing industry, metal pretreatment is a crucial process, which directly affects the quality of the enamel finished product. Whether it is an enameled steel plate or a cast iron billet, pretreatment is required. It is worth mentioning that stainless steel enamel also requires stainless steel pretreatment. Stainless steel enamel needs to be sandblasted to roughen the surface of the body and improve the close adhesion between the enamel layer and the enamel layer. A customer once tried to make stainless steel enamel by himself, but the adhesion of the finished product was not good. However, both the enamel manufacturing process and the quality of the enamel frit and stainless steel were confirmed to be correct. After in-depth investigation and testing by our technical staff, we found that the cause was the lack of metal pretreatment. After sandblasting pretreatment, the adhesion of the enamel finished stainless steel products is significantly improved, meeting the customer's expectations. Taking steel plate enamel as an example, the metal pretreatment process is equally rigorous. First, the steel plate workpiece needs to be soaked in a degreasing liquid at 55 to 65 degrees Celsius for 15 to 30 minutes to completely remove oil stains on the surface. Next, the remaining liquid on the surface of the steel plate is thoroughly cleaned by water washing to ensure that no impurities remain. Then comes the rust removal process, where the steel plate is soaked in a rust removal solution at 50~60°C for 10~15 minutes (the specific time depends on the rust on the surface of the steel plate). This step is to remove rust and oxides from the surface of the steel plate and ensure that the enamel layer can be evenly and firmly attached to the metal substrate. After rust removal, wash again to ensure the surface of the steel plate is clean. Finally, the steel plate is neutralized to ensure that every part of the steel plate workpiece is immersed in the neutralizing solution to neutralize the remaining acid and alkali substances and prevent adverse effects on the subsequent enamel layer. After the neutralization is completed, the steel plate workpiece is naturally air-dried to prepare for the subsequent enameling process. Although pre-treating enameled metal may seem simple, every step is crucial. It not only improves the quality of finished enamel products, but also extends the service life of the product. Therefore, as an enamel manufacturer, you should attach great importance to the metal pretreatment process and ensure that every step is operated in strict accordance with standards.


Melted plate material reappears by way of?

Melted plate material reappears through the process of solidification, where the material cools down and solidifies into a solid state. This can occur through cooling the material down to below its melting point or by casting the material into a mold to give it a specific shape as it solidifies.


How Much Do You Know About Enamel Bolted Tank?

Anyone who is engaged in sewage treatment, chemical industry, food fermentation, enamel industry, etc. must have heard of enamel bolted tanks, which are usually used to store or transport various liquid and solid materials. Here are a few things you have to know about enamel bolted tank: Knowledge point 1: The shape of the bolted tank The enamel bolted tank is mainly composed of enamel steel plates, self-locking bolts and sealants, and the main component is enamel bolted steel plates. The enamel bolted steel plate is a double-sided double-layer enamel for the enamel special steel plate. The enamel surface is smooth and moist. The standard color is green or blue, which is bright and bright. It can also be customized by adding different enamel pigments. Knowledge point 2: stable quality, strong corrosion resistance The enamel assembly board has a high degree of standardization and stable quality. The thickness of the steel plate used for the enamel assembly tank can reach 12mm, the two sides of the steel plate are enamel, and the thickness of the porcelain layer is 150~300μm, which has the characteristics of acid and alkali corrosion resistance and high temperature resistance. Knowledge point 3: Short installation cycle Enamel bolted panels are produced and processed in the factory, packaged and shipped to the construction site for assembly. The assembly board is connected by bolts, and the assembly gap is sealed with sealant. Workers first install the top plate of the tank on the ground, and then use a special tool to lift it to the height of one layer of plate, and then install the second circle of plates, and this operation is repeated until the tank body is installed. From start to finish, workers only need to operate on the ground, simple and safe. The installation process is less affected by the weather, and the installation cycle is easy to control. Knowledge point 4: scalability and migration The enamel bolted tank is made up of standard enamel bolted panels with bolts, and the tank can be expanded, dismantled, relocated or reassembled at any time after completion and operation.


What was the Gospel of the Clean Plate?

After WWI, there were extreme food shortages in Europe. A poster advising people to Leave a clean dinner plate and take only as much as you need was put out. The title was "The Gospel of the Clean Plate."


What is dresden plate?

Dresden Plate is a traditional quilting pattern that consists of fabric or patchwork pieces arranged in a circle to create a floral-like design. It is a popular design for quilts and other fabric projects.


What is the difference between cast iron and steel enamel (from the perspective of enamel frit)?

To understand the difference between cast iron enamel and steel plate enamel, we must first know the difference between cast iron and steel plate. Both steel and cast iron are iron-carbon alloys, and the distinction between these two metallic materials is mainly based on carbon content. The cast iron generally used in enamel is gray iron or gray cast iron, and the carbon content is usually 3%~3.7%, while the carbon content of refined iron (low carbon steel cold-rolled sheet) is less than 0.12%, which means that cast iron contains more than steel plate. More impurities, when sintering, are more likely to generate carbon dioxide and other gases, resulting in enamel defects such as pinholes, air bubbles, and pores on the porcelain surface. Therefore, in the selection of enamel frit, cast iron enamel frit needs to meet the following conditions: low temperature firing, to avoid oxidation and decomposition of iron carbide in cast iron, and release carbon dioxide; good adaptability, which is conducive to gas in the early stage of firing It has good sealing performance, and does not allow gas to break through the porcelain layer and cause defects in the later stage of firing. Therefore, the formula design of enamel primer is very different from that of steel plate primer. For example, the firing temperature is generally 760~780℃, which is obviously lower than the high temperature of 850℃ of steel plate primer. At the same time, the addition amount of cast iron frit in borax, feldspar and other raw materials is larger than that of steel plate enamel frit, the purpose is to reduce the viscosity of the enamel frit, improve the wettability, form small pores and accommodate the gas discharged from the matrix, and improve the solubility of iron oxide. The formula design of cast iron enamel frit and steel plate enamel frit is very different, in order to meet the needs of enamel enamel frit for the corresponding material to the greatest extent.


What is the use of the Feed Cover Plate for machine embroidery and darning?

The feed cover plate covers the feed dogs. The feed dogs advance the fabric when sewing. This is undesirable when embroidering or darning as you need to move the fabric only when necessary.


What part of speech is plate?

Plate can be a noun and a verb:Put the food on a clean plate. -- nounPlate the food and keep it warm. -- verb