try painting it with a catilist such as peroxide, or a catilist used in two part epoxy, whatever you try be careful you are working with reactive chemicals do small controled test first watching for excessive heat and toxic vapour.
Glaze
Obviously after it has defrosted. Depending on how you intend to serve it - not whole if it is already cooked. If sliced, then a coating of glaze would be sufficient while you reheated the gammon. If attempting to reheat whole, then the glaze should be applied about 15 minutes before the end of the cooking process, but be aware the ham will be dry.
Icing, frosting, or perhaps for some cakes a glaze.
Most glazes should be air dried. However if you are using a glaze on ceramics, it will dry when it is placed in the kiln to be fired.
The gloss is fired on glaze. In short, it's a very thin coating of glass. You might try using a very fine emery cloth to dull the glaze, but the results won't be what you wish. For a temporary fix, try simply painting over the glaze with acrylic wash. It will dull the finish. After all, you might change your mind later.
To install glass in a window is "to glaze". By analogy, it also means to cover a food in a candied coating, e.g., glazed ham.
A glaze acts as a protective and decorative coating for ceramic surfaces. When applied and fired, it forms a glass-like layer that enhances durability, prevents moisture absorption, and adds a smooth, glossy finish. This transformation not only improves the ceramic’s appearance but also makes it more resistant to stains and scratches. At Astonishing Detail, we apply a similar concept with our ceramic coating services, creating a protective layer that keeps vehicles looking polished and well-protected.
You can buy it on Krylon.com, or check your local hardware store.
The glass in a frame. Commonly the window of a house or the glaze.The word Glaze means any extra surface coating on a thing .....Like doughnut gets a soft sugar glaze ... while a clay pot gets a liquid glaze heated into a Hard glaze.....or the runner had a glaze of sweat on his face...... um Oh yes... glass too is known as glaze so too is the putty used to seal it into its frame....I can only assume they get this odd usage of the word because the glass is an extra coating on the building
Hair Glaze is commanly used to make ur hair to look dry and feel shiny. The main concept behind a glaze is to avoid combing for more than a day. You should apply the glaze once u wakes up from bed.
Hair Glaze is commanly used to make ur hair to look dry and feel shiny. The main concept behind a glaze is to avoid combing for more than a day. You should apply the glaze once u wakes up from bed.
I think you mean the word 'underglaze' which is whatever is under the glaze on a pot. So you can speak of 'underglaze colours' or 'underglaze painting' and so on. Because glaze is the final coating on a pot, just about everything else is 'underglaze' work. There is also 'On-glaze' painting, which what it says ---I bet you guessed that one o.k. !