To remove black marks from a steel bath, you can use a non-abrasive cleaner or a paste made from baking soda and water. Apply the paste to the marks and gently scrub with a soft cloth or sponge. For tougher stains, a mixture of vinegar and baking soda can be effective. Always rinse thoroughly with water after cleaning to avoid any residue.
spit in your car
use 000 or 0000 steelwool with oil.............
you could use baby oil or go to a pharmasist and they could recomend something.
You get a bulldog with permanent black marks that are hard to scrub off?
According to this forum, http://forums.iboats.com/showthread.php?t=295220, Clorox Cleanup is a good solution for black marks on boat seats. The black marks are most likely mildew and will come off easily with Clorox Cleanup without damaging your seats.
Iron marks burn the fabric, which damages it, so it may not be removeable. If you can get the black mark off, the fabric underneath it will be weaker than it originally was. To try and remove the stain, scrape off any charring, then pretreat the stain, rinse it, and then wash it as you normally would.
maybe try toothpaste. i accidently put my mum's salad things in the dishwasher and they turned black so i used toothpaste to get the black stuff off. hope this helps!
steel wool and a polishing stone. But, why would you remove the black finish?
Cut off marks for rpmt 2009
you need to take it off an look to see if it is fouled down(black marks)
The cut off marks in IITs depends on the paper in that year. Normally it is around 40% of the total marks.
173.25