use 000 or 0000 steelwool with oil.............
Easy Off, Bam!, and Mr. Clean Magic Eraser have been recommended for removing metal marks from porcelain tubs.
The best way to clean earrings with out tarnishing the metal is by using rubbing alcohol. This will not only clean the earrings, but it also works as a disinfectant. Rubbing alcohol does all this without tarnishing the metal.
Silicone whisks aren't as strong and rigid as metal whisks, and cheaper ones tend to be a little flimsy. They do have the advantage of not scratching non-stick cookware and being easy to clean.
You can clean metal by using some stuff to clear it off and away it goes.
The purpose of flux is to clean oxides from metal surfaces to ensure a clean bond in soldering or brassing them together. without a proper flux soldered and brazed joint integrity is unreliable.
yes, barring factors like other chemical attacks or scratching.
Non-stick pans can be safely washed in a dishwasher without damaging the coating. The coating is designed to withstand household dish detergents. The only real way to damage the coating is by scratching it with metal utensils.
Forks are made of metal because metal is strong and durable, allowing forks to withstand repeated use. Metal also provides a stable structure for the tines of the fork, which are used for picking up food without bending or breaking. Additionally, metal is easy to clean and maintain, making it a practical material for kitchen utensils like forks.
The timing marks should be found on a little metal plate directly above the harmonic balancer.
Pickling. http://en.wikipedia.org/wiki/Pickling_(metal)
Look at the front of the engine and down low you should see a large pulley (a metal wheel that the fanbelt runs on). On the outer circumference of that pully should be marks stamped into the metal. There should be a small tab visible that lines up with the marks on the pulley.
Open the covering for the belt and look closely at the metal area around where the teeth of the belt are. There should be some white markings. There is not much spacing between the belt and the metal area where you will see the marks. The marks were hard for me to see at first.