The 'dent' is a spout for pouring liquid
I noticed there was a dent in the side of the saucepan after I dropped it on the floor.
Some companies offer a paintless dent removal srvice which is priced by size of dent and location. other than that get behind the dent with a small flat object wood or metal and hammer the block to get rid of the dent. If dent is small use a picking hammer and with the point work around the circle of the dent with the point trying to keep it even with the outside surface. Sand the surface when you get close and go to the flat side of a body hammer and smooth the outside where it got picked out, Apply a small amount fo body filler and sand to even the suface prime sand prime sand with different grits and repaint the surface
try pop a dent or if you can get it out with that try a rubber mallet if you can get to the back side of it
A cone.
Answer:No, A Sphere Is Completely Round it Has No Flat Side what So Ever.
The flat side marks the cathode, or negative wire coming out of the LED. Make sure that the wire on the flat side is connected to ground.
No. You need to visit a store or go to their website.
take a hair dryer to it for 30 sec to 1 mintute then flip a can of air duster upside down spray generously an wait the dent will come out and there is no damage to the paint
A concave lens has a curved surface that curves inward on both sides, causing light rays to diverge after passing through. In contrast, a plano-concave lens has one flat side and one curved concave side, which also causes light to diverge but with less optical power compared to a fully concave lens.
Wire side down in a drawer, nested like spoons
Passenger side. Its that flat cover with all those screws in it. It is a big process to get off.
No. A side normally means a flat surface and a sphere does not have one. It does have one curved surface.