There are many steps to clean the room and house which are given below:
Cleaning glass/mirrors. It is commonly thought that glass cleaner does the cleaning. It's no substitute for soapy water
First, wash your glass (including windows and mirrors) with a solution of warm or hot water, dish soap and a rag, sponge, or squeegee. Powdered no-scratch cleaner works fantastic for cleaning mirrors, glass, ceramics, and metals because it scrubs off hard water residue without scratching the surface.
Wipe down surface with a dry lint-free cloth or lint-free paper towels.
If you want to clean glass and be environmentally friendly, clean the glass with vinegar and water, dry with a lint-free cloth, and rub the glass with newspaper. No streaks! Make sure you use some elbow grease -- it requires pressure to properly clean glass.
Alternatively, spray glass cleaner on a paper towel and clean the glass surface. The glass cleaner acts as a shield to help keep spots and dust easy to remove. When misused, glass "cleaner" will leave streaks.
Polish furniture. Like glass cleaner, furniture polish isn't meant to be a cleaner. However, it can be used for cleaning. If you'd like to use furniture polish, make sure to carefully read the labels and find one made specifically for what you need.
Using all-purpose cleaners. Be cautious with all-purpose cleaners. They aren't always safe for every purpose you'll have in mind. Make sure to thoroughly read labels before purchasing to ensure it fits your needs.
Working outside. Outdoor tasks can help create a better living environment. Raking leaves helps to prevent mold growth that happens in wet climates after raining. Raking regularly will also assist in dropping the bug count in your yard. Raking will also leave your yard looking neat and cared for and offer more room for grass to grow and sunlight to reach.
Vacuuming is the most effective way to clean up all the dust and other loose junk that accumulates on your floor (and it's practically a daily necessity when you have shedding pets). If you're always putting off vacuuming, try using a dry dust mop (the microfiber kind works well) if you have tile/wood floors.
You can use a carpet sweeper (non-electric machine you push that has brushes underneath) if you have carpet. Both involve less fuss than getting out the vacuum and will let you go longer between vacuuming.
See the related link for further information.
The correct order for cleaning and sanitizing is: 1) remove debris and dirt from the surface, 2) wash the surface with soap and water, 3) rinse the surface with clean water, and 4) apply a sanitizing solution to kill germs and bacteria.
The correct order of steps for cleaning and sanitizing involves first removing any visible dirt and debris by washing surfaces with soap and water. Next, rinse the surfaces thoroughly to eliminate any remaining soap. After that, apply an appropriate sanitizing solution, ensuring it contacts the surfaces for the recommended duration. Finally, allow the surfaces to air dry to ensure effective sanitization.
Find out yourself, i had to.
handizivi ini
The three steps of the cleaning process in a subway are a) washing, b) rinsing, and c) sanitizing. Washing involves removing dirt and debris with soap or detergent, rinsing follows to remove any residual soap, and sanitizing is the final step to kill germs and bacteria, ensuring a clean and safe environment. Spraying is not considered a separate step in this process.
The correct sequence of steps in the six-step sanitizing method includes: 1) cleaning the surface to remove dirt and debris, 2) rinsing the surface to eliminate any remaining cleaning agents, 3) applying an appropriate sanitizer, 4) allowing the sanitizer to sit for the required contact time, 5) rinsing again if necessary, and 6) air drying or wiping the surface with a clean towel. Following this method ensures effective sanitization and reduces the risk of contamination.
The correct steps for the scientific method are: Observation Hypothesis Theory Scientific Law
donno
donno
donno
The five steps of cleaning in the workplace typically include: 1) Preparation - Gather necessary cleaning supplies and equipment. 2) Dusting - Remove dust from surfaces, including furniture and equipment. 3) Cleaning - Wipe down surfaces using appropriate cleaning agents to remove dirt and germs. 4) Sanitizing - Apply disinfectants to high-touch areas to reduce the risk of contamination. 5) Organizing - Arrange items neatly and ensure the workspace is tidy for optimal efficiency.
2,3,4,1