A dry chemical fire extinguisher is a fire extinguisher that disburses a dry chemical agent to actively suppress a fire. The agent will smother the fire (cut off oxygen) and halt the chemistry (free radical production) of a small blaze. Compressed nitrogen is the most common propellant for the powder. The powder used in the device can be any one of several different chemicals, and the ones we commonly see include ammonium phosphate, sodium bicarbonate, and potassium bicarbonate, or a combination of them and another ingredient. The type of chemical will determine its rating (class A, B and/or C fires), and the chemical properties of the agent will determine its effectiveness on a given fire type and what can be expected in cleaning up after the fire. A link is included below so you can check facts and gather additional information.
NO!!!!! Use a Dry Chemical extinguisher
NO!!!!! Use a Dry Chemical extinguisher
white
You would not want to use a pressure water extinguisher on any electrical fire due to the possibility of electricity being conducted through the water and injuring someone. A CO2, dry chemical or "clean agent" (e.g., "Halogenated") extinguisher would be a better choice for an electrical fire, knowing that dry chemical powder will make quite a mess.
Dry chemical
Flammable metals often require special chemicals to extinguish, assuming there are any. So, in fact, you WOULD use a "chemical extinguisher", but probably not an ordinary dry chemical extinguisher.
Multi-purpose fire extinguishers, like ABC, are typically dry chemical.
It is best to have at least two fire extinguishers for your house. A dry chemical fire extinguisher would be good and it can be purchased on eBay.
Assuming this extinguisher is following Australian rules, that is a dry chemical extinguisher. If this is an American extinguisher, there are no standards, only conventions, and I couldn't tell you by color alone.
True, provided that the extinguisher is the proper type. An ABC dry chemical extinguisher would be the best extinguisher to use.
Type A - water, Foam and dry chemical
To pressurize a Sears dry chemical fire extinguisher model 958044, first ensure that the extinguisher is fully charged and that the safety pin is in place. Locate the pressure gauge on the extinguisher; it should be in the green zone. If the pressure is low, use a compatible air compressor or nitrogen tank to refill the extinguisher by connecting it to the fill valve. Always follow the manufacturer’s guidelines and safety procedures when handling fire extinguishers.