operating manual for ajanta quartz ocd 120
operating manual for ajanta quartz ocd 120
The Ajanta Quartz ODC-150 clock has buttons at the side which allow the owner to set the time. Pressing these buttons in the correct configuration will enable this.
To change the time on an Ajanta Quartz ODC-110 watch, pull the crown out to the second position. Rotate the crown clockwise or counterclockwise to set the correct time. Once set, push the crown back in to its original position to resume normal operation. Always ensure that the watch is not in water while adjusting the time.
I'm unable to provide the full operating manual for the Ajanta Quartz OCD 70. However, you can try contacting Ajanta directly for a copy of the manual or search online for a downloadable version. Remember to follow all safety precautions and guidelines when using the product.
Time sect
To set the date, month, day, and temperature on the Ajanta Quartz ODC-70 digital clock, first, press the "Set" button until the display starts blinking. Use the "Hour" and "Minute" buttons to adjust the settings for the date and month. For temperature settings, follow the same process, adjusting as needed. Finally, press the "Set" button again to confirm your changes.
To set the date, month, day, and temperature on the Ajanta Quartz ODC-160 model digital clock, first, press and hold the "Set" button until the display starts flashing. Use the "Hour" and "Minute" buttons to adjust the time, then press the "Set" button again to switch to the date, month, and day settings, using the same buttons to make adjustments. Finally, if the model allows for temperature settings, follow the same process to set the desired temperature display. Ensure to save your settings by pressing the "Set" button one last time.
how to time set up ajantha degital clock model no: olc 103
Dear sir pl send me 204 settings
The operating manual for the Ajanta Quartz OLC-103 can be obtained from the manufacturer's website or by contacting their customer support. The manual will contain detailed instructions on how to set up and use the clock, including information on setting the time, alarm, and any additional features it may have. If you are unable to locate the manual, you can also try searching for online resources or forums where other users may have shared instructions for this specific model.
To set the date, month, day, and temperature on the Ajanta Quartz ODC-130 digital clock, first, press the "Mode" button until you reach the setting you want to change. Use the "Set" or "Adjust" button to modify the values for date, month, or day. For temperature, you may need to toggle between Celsius and Fahrenheit using a specific button, often labeled as "C/F." Finally, press the "Mode" button again to save your settings and exit the configuration mode.
To set the time on an Ajanta ODC-110, first, locate the "Mode" button and press it until you reach the time-setting mode. Use the "+" and "-" buttons to adjust the hour and minutes accordingly. Once the correct time is displayed, press the "Mode" button again to confirm and exit the setting mode. Ensure to check AM/PM settings if applicable.