The posts are generally six feet apart. You can use the wire fence to hold it up. You can go every ten feet though it may not be as stable as using six.
.73 miles
How many posts you need for a fence 54 x 54 depends on how far apart you wish to place the posts. Usually posts are placed every 6 - 8 feet, but stallion paddocks frequently have posts placed every 4 feet apart. It's not clear to me how many linear feet your fence is, because the question is written as if the fence is 54 feet high and 54 feet long.
Fence posts should generally be spaced 6-8 feet apart to provide adequate support for the fence structure. However, the exact spacing will also depend on factors such as the type of fence, the terrain, and the materials being used. It's recommended to check with local building codes or a professional installer for specific guidance.
When installing a fence, posts are typically spaced 6 to 8 feet apart, depending on the type of fence and local regulations. For heavier materials, like vinyl or wood privacy fences, it's often best to use 6-foot spacing for added stability. Chain-link fences can sometimes allow for wider spacing. Always check local building codes and consider the specific fence design for optimal results.
All depends all the type of fence!!! Woven wire is 15 ft. max. Board fence 6'9 with 14 ft. boards Hi-tensile wire up 40 ft. with steel post or battons in between the wooden post
The answer depends on the size of the fence panels, and the shape of the area to be enclosed.
The distance a fence can be placed from a road varies based on local zoning laws and regulations. Many municipalities have specific setback requirements that dictate how far structures, including fences, must be from property lines or roadways for safety and visibility reasons. It's essential to check with local government or zoning offices to determine the exact requirements in your area before installing a fence.
The fence cannot be outside your property line.
Typically you are not to build a fence anywhere past your property line.
maby 24 miles
Ironside - 1967 The Far Side of the Fence 8-10 was released on: USA: 21 November 1974
To calculate the number of posts you would need to no the shape of the 20 acres. If we assume the land is square we can calculate the length of one side of the 20 acres as follows: 1 Acres equals 43,560 square feet 20 acres equals 20 X 43,560 = 871200 square feet. We can find the length of one side by taking the square root of 871200 = 933.4 feet. Divide the length of one side by the spacing of the posts and multiply by 4 to get the total number of posts. so for 12 feet spacing of posts 933.4 /12 X 4 = 312 posts.