Press the function key to enter the time mode.
Press and hold the function key for 3 seconds to enter the setting mode.
While the "hour" digits are flashing, press the function key to set the hour (each press moves forward 1 hour).
When the hour is set, press on the function key for 3 seconds until the "minute" digits start flashing.
Press the function key to set the minutes.
When the minute is set, press on the function key for 3 seconds until the "month" digits start flashing.
Press the function key to set the month.
When the month is set, press on the function key for 3 seconds until the "day" digits start flashing.
Press the function key to set the day.
Release the function key for 30 seconds to exit the setting mode.
To adjust the time on a Bum watch, usually you need to pull out the crown (the small knob on the side) and turn it to set the hour and minute hands to the correct time. Pushing the crown back in should then lock in the new time. Be sure to refer to the user manual for specific instructions for your particular Bum watch model.
No, you can keep your watch, but depending on where in Canada you are from, you may have to adjust the time to compensate for possibly different time zones.
It's a tool that helps you adjust the timing of your engine.
To adjust the time on a Nautica watch, first unscrew the crown (if it's a screw-down type), pull the crown out to the time-setting position, and then turn it clockwise or counterclockwise to adjust the time. Once the correct time is set, push the crown back in and screw it down (if applicable) to ensure water resistance.
To set the time on a Casio wr50m watch, select normal time view from the mode button. Press the adjust button, and seconds begin to flash. Adjust the time with the start/stop button. Switch from seconds, minutes, and hours with the mode button. When the time displays correctly, press the bottom adjust button to set the time.
hold down the adjust (set) button until the time starts to BLINK and then clivk the buttons on the left side of the watch to set the time. after you have done this, you must hold down the adjust button once more until the time STOPS blinking
To reset the time on a Casio GW500A watch, first, press and hold the "Adjust" button until the time starts to flash. Use the "Mode" button to cycle through settings like hours, minutes, and seconds, and adjust them using the "Light" and "Search" buttons. Once you've set the correct time, press the "Adjust" button again to save the settings and exit the time-setting mode.
To set the time on a Charles Raymond watch, locate the crown on the side of the watch. Pull the crown out to its second position and rotate it to adjust the time. Once the correct time is set, push the crown back in to its original position.
To change the time in a G Shock watch, first press the "adjust" button. You can then choose the number that you want to change, whether it be the hour, minute, or second.
To set the time on a Stauer watch, pull the crown out to the time-setting position. Turn the crown clockwise or counterclockwise to adjust the time to the desired hour and minute. Push the crown back in once the correct time is set.
To set the time on an Aspen watch, typically you would pull out the crown to the time-setting position and then rotate it to adjust the hour and minute hands to the correct time. You may need to refer to the watch's instruction manual for specific guidance as different Aspen watch models may have variations in the setting process.
To set the time on your TechnoMarine watch, first locate the watch crown on the side of the watch. Pull the crown out to the appropriate position (usually position 2 for time setting) and then turn the crown to adjust the hour and minute hands to the correct time. Once you have set the time, push the crown back in to secure the settings.