Original answer:
Spells and magic are fantasy. Pure fiction. They do not work in real life.
switch wiring or mirror it's self probly switch
If yourr talking about the side view mirror switch then it pulls right out.
To get to the side mirror switch on a 2002 Dodge Intrepid look on the driver side door. The mirror switch is located just above the window up and down switches.
To replace the switch on a lighted makeup mirror, first unplug the mirror and ensure it's completely powered off. Carefully remove any screws or clips holding the mirror's casing together to access the internal components. Identify the faulty switch, disconnect its wires, and replace it with a new switch, ensuring the connections are secure. Finally, reassemble the mirror, plug it in, and test the new switch.
on the 88 ranger the switch is above your rearview mirror located on the ceiling on the 88 ranger the switch is above your rearview mirror located on the ceiling
switch wiring or mirror it's self probly switch
Look in a mirror, I suppose!
Your local Ford dealer will have the wiring diagram for the mirror control switch for the Expedition. They have all the manuals with the diagrams.
There's a torx screw at the base of the mirror that you loosen to take the mirror off the mounting plate.
If the mirror is not working when the switch is pressed, it could be due to a blown fuse, a faulty switch, or a broken connection in the wiring. Additionally, the mirror's motor might be malfunctioning or jammed. Checking the electrical connections and testing the fuse can help identify the issue. If these components are functional, the mirror itself may need repair or replacement.
'the rotary switch in the drivers door has 3 positions "R centre and L" if it is in the centre then his only turns on the heated mirror facility twist it to r and you can then use the switch as a joystick to move the mirror up down in out. move the switch to L to move the nearside mirror'
To remove the power mirror switch on a Mazda Miata, start by using a flathead screwdriver to gently pry off the trim panel surrounding the switch. Once the panel is removed, disconnect the electrical connector attached to the switch. You can then unscrew or unclip the switch from its mounting location. After that, the switch can be pulled out for replacement or repair.