Neptune seems to be the big brand out there. You are probably looking anywhere from $400 to $600. Amazon seems to have some decent deals as well. Amazon.com
A drum mixer is an industrial sized mixer mostly used to mix concrete or other like things at construction sites. You can find a link to make a purchase here http://www.thecarycompany.com/containers/drums/drum_mixers.html.
To replace the main drum bearing on a Clark's cement mixer, first disconnect the power source and ensure the mixer is stable. Remove the drum by unbolting it from the frame, then carefully take off the old bearing, which may require some force or a bearing puller. Clean the area, install the new bearing in the same position, and reattach the drum securely. Finally, check that everything is aligned properly and test the mixer before use.
To replace the main drum bearing on a Clark's CCM125C cement mixer (pre-1999), first, disconnect the mixer from power and remove the drum by unscrewing the bolts that secure it to the frame. Once the drum is off, carefully extract the old bearing from its housing, using a bearing puller if necessary. Clean the bearing housing, then press or tap the new bearing into place, ensuring it is seated correctly. Finally, reassemble the drum onto the mixer, securing it with the bolts, and test the operation before use.
BASCO, an industry leader in industrial packaging and container products, supplies customers with top-quality drum mixers and other drum and pail ...
It depends because a DTXPLORER is a drum set and from what I have looked up a Alesis DM5 is a drum Mixer
On industrial level, there are about 30 different types of mixers/stirring machines. A few of them are: V blender, paddle mixer, counter-rotating mixer, drum blender, banbury mixer.
Yes. In fact, I would recommend doing this instead of just running the mics through your band's powered mixer. That way, all your drum sounds (pre-mixed) will fit into just one input on your band's powered mixer. It takes about a minimum of 6 or 7 mics to capture a drum kit properly and that's a hell of a lot of inputs to be using on your band's P.A. Just run the mics through your own mixer, then run your mixer's "Main 1" output to your band's P.A. input. Use a balanced cable. Also, if the mixer that you are using is unpowered, then get yourself a couple powered monitors to run directly off of it so you can have some monitoring without using one of the the P.A. monitors. If your drum mixer IS powered, however, just get yourself some speakers and you've got yourself some monitors. In a nutshell, I recommend getting a small powered mixer for your drum mics (something with 100W minimum) with unpowered monitors running right off of it (use the "Main 2" output). Connect the mixer's "Main 1" output to your band's P.A. system for the final mix. But remember, if you do it like this, you have to dial in a good mix on your drum mics through your own little mixer because the sound guy will only be able to adjust the volume of the drum kit AS A WHOLE through the main P.A. system. This is what I do and it works very well.
The Karaoke Mixer for the Singing Machine will allow you to join in on your favorite songs with the Mixer's built in 13 key synthesizer or its built in drum pads. You can play right along with your favorite songs.
It depends on the mixer. If you wan't to buy different attachments you should contact the mixer company and find out if they would fit.
There are many places you can go online in order to purchase a replacement mixer cover for your sunbeam mixer. Some of these websites include www.bizrate.com, and sunbeam-stand-mixer-cover.standmixer1.us.
You can find attachments and blades for my Bosch mixer at www.amazon.com. You can also find then online at PleasantHillGrain.com.
You can find a cordless mixer online on eBay or Amazon. These two online marketplaces have everything you could ever buy for the absolute best pricing.