Tension
More than 2,000 feet; nearly 700m underground.
The force you are referring to is called compressional force. This force occurs when tectonic plates collide or push against each other, leading to the formation of mountain ranges and deep-sea trenches.
Global winds do not directly cause deep currents. Deep ocean currents are primarily driven by differences in water density, which are influenced by temperature and salinity. While global winds can indirectly affect the distribution and movement of deep currents through their impact on surface currents and mixing processes, they are not the primary driving force.
Compression
A longwall mining technique is often used to remove coal from deep underground coal seams. It involves a shearer cutting the coal along the face of the seam while hydraulic roof supports move forward, allowing the roof to collapse behind the shearer.
Yes, you can get stuck in slime depending on its thickness and stickiness. Slime can be challenging to remove from clothing, hair, or surfaces, so it's important to be careful when playing with it to avoid getting stuck.
A hack saw and breathing equipment sounds like the only way to me unless you want to empty it.
they are 750m deep
i have the same thing in my leg so im going to see a doctor and get it professionally removed
The pressure at the bottom of the pitcher of water 35cm deep is higher than at the bottom of the bathtub of water 30cm deep. Pressure in a fluid increases with depth, so the deeper the water column, the greater the pressure at the bottom. This is due to the weight of the water above exerting a force on the bottom.
Not being able to take a deep breath is not always considered shortness of breath. If you are exerting yourself, where you need more air but can't take a deep breath, you would have a shortness of breath.
* kjkj
If you have the room I would cut the wires off at the sensor and slip a 1/2" drive, 6 point, 7/8" deep socket with a long breaker bar over the sensor.
with polish
That is called deep mining.
To remove a broken key from a lock, you can try using tweezers, a key extractor tool, or a small flathead screwdriver. Insert the tool into the lock and carefully pull out the broken key fragment. If the key is stuck deep inside, you may need to call a locksmith for assistance.
You should rock your vehicle, back and forth.