If density of Copper is 8.9 g/cm3, then 534 g, not 530 g, for a 30 cm X 20 cm X .10 cm
quite easily
It is a physical change because it has not changed its chemical composition.
Since sound is the effect of vibrations in a media, copper can definitely conduct sound. However, as a wire it would have a certain damping factor, much a like spring, that would absorb the energy of sound vibrations. So a sheet of copper would conduct sound, but a thin wire would not.
You can separate silver and Copper b/c they have 2 different melting points. Slivers melting point is (961.78 °C, 1763.2 °F) and Coppers is (1084.62 C / 1984.32 F) getting the temp. to the excact melting point of sliver, while flating it to a thin sheet. should in theory melt off the silver, while the copper would stay in a solid state.
I'm not telling!!!! Wanna know why??? It's because if i did i would be telling you the answer for your daily science sheet!!! ok fine i will it's neon because neon is a type of color and sulfur water and copper are minerals
530
530
A copper sheet is made of... surprise... copper. No gold.
530
Yes
well you see a copper cathoid sheet has a few sizes a normal size is about 10.524g
With a good quality brass /copper cleaner like Never Dull
To make a lead or copper pipe all you need is sheet copper/ lead and either lead wipe /solder /braze the end or if copper use a Pittsburg found in sheet metal shops to make the seam
The amount of copper and zinc in brass vary considerably depending on the type of brass. Most types of brass can be made into sheet form. Most brass is about 30-40% zinc and about 60-70% copper.
Basic copper is an online site were you can get copper sheet. And you should probally would be able to get it from Metalsorce they are selling waste from a large metal company.
These metals are malleable.
Mercury will form a thin film on a clean copper sheet, and in this form, is used to capture very fine or dissolved gold. And clean copper is very easy to solder.