0
by the process of sublimation
the mixture of sodium chloride and ammonium chloride is placed in a dish and covered with an inverted funnel
on heating, ammonium chloride will change into vapour,which will condense into a solid in the neck of the funnel ,whereas sodium chloride was left behind the dish
What else can I help you with?
How can you separate ammonium chloride and copper oxide?
Ammonium chloride is water-soluble whereas copper oxide is not. You can separate them by dissolving the mixture in water, then filtering it. The filtrate solution will contain ammonium chloride and the residue will contain copper oxide.
What is the process of separating ammonium chloride from ammonium chloride and sodium chloride?
To separate ammonium chloride from a mixture of ammonium chloride and sodium chloride, you can dissolve the mixture in water to form a solution. Then, heat the solution to evaporate the water, leaving behind solid ammonium chloride due to its lower melting point compared to sodium chloride. This process is known as crystallization.
Separating a mixture of iodine ammonim chloride and barium chloride?
first add water to mixture the ammonium chloride and barium chloride dissolve in the water but the iodine does not. filter out the iodine using filtration then use fractional crystallization to separate the ammonium chloride and barium chloride and water
How do you separate ammonium chloride and sulphur from its mixture?
Ammonium chloride is soluble in water, sulphur isn't. So mix the mixture with water and filter out the sulphur. Now evaporate the filtrate to obtain the ammonium chloride and permit the sulphur to dry.
Does ammonium chloride dissolve in water?
Yes, ammonium chloride dissolves in water. This endothermic reaction will actually make the water's temperature decrease.
How can you separate ammonium chloride from sand?
Ammonium chloride is soluble in water and the sand can be separated from the solution by filtering.
How can you separate ammonium chloride and copper oxide?
Ammonium chloride is water-soluble whereas copper oxide is not. You can separate them by dissolving the mixture in water, then filtering it. The filtrate solution will contain ammonium chloride and the residue will contain copper oxide.
What is the process of separating ammonium chloride from ammonium chloride and sodium chloride?
To separate ammonium chloride from a mixture of ammonium chloride and sodium chloride, you can dissolve the mixture in water to form a solution. Then, heat the solution to evaporate the water, leaving behind solid ammonium chloride due to its lower melting point compared to sodium chloride. This process is known as crystallization.
Name a suitable technique to separate sand from ammonium chloride?
One suitable technique to separate sand from ammonium chloride is filtration. The mixture can be dissolved in water, allowing the ammonium chloride to go into solution while the sand remains as a solid. The solution can then be passed through a filter to separate the sand from the dissolved ammonium chloride.
Separating a mixture of iodine ammonim chloride and barium chloride?
first add water to mixture the ammonium chloride and barium chloride dissolve in the water but the iodine does not. filter out the iodine using filtration then use fractional crystallization to separate the ammonium chloride and barium chloride and water
How do you separate silicon dioxide ammonium chloride sodium chloride from a mixture?
Heat it until the ammonium chloride sublimes. Then add distilled water to what's left, stir, allow the solid to settle to the bottom of the dish, and decant the liquid. Repeat that 3 times. That'll extract the sodium chloride (salt) from the silicon dioxide (sand), because the NaCl is soluble in water. Then heat the salt water solution carefully until all the water is evaporated. Then heat the sand to dry it out.
How can you separate a mixture of naphthalene and ammonium chloride?
One way is to slurry the solid mixture with water. The ammonium chloride will dissolve and the naphthalene will not. Ammonium chloride can then be recovered by evaporating the water solution of it that is formed.
How do you separate ammonium chloride from a mixture of ammonium chloride and potassium chloride?
To separate ammonium chloride from a mixture of ammonium chloride and potassium chloride, you can use the process of sublimation. Ammonium chloride sublimes at a lower temperature compared to potassium chloride. By heating the mixture, the ammonium chloride will directly change from a solid to a gas, leaving behind the potassium chloride. The resulting gas can be condensed back into solid form for collection.
How do you separate ammonium chloride and barium sulphate?
Add the mixture in water ammonium chloride is highly soluble in water while Barium sulphate is insoluble , filter the solution the residue(solid part) is Barium sulphate, evaporate the solution and get solid Ammonium chloride.
How can you separate a mixture of iodine ammonium chloride and sand?
Add sufficient water to dissolve the ammonium chloride. Neither the iodine nor the sand will dissolve.Filter out the solids.Evaporate the ammonium chloride from the solution.Heat the solids gently in a retort to sublimate the iodine and recover it.
How do you separate ammonium chloride and common salt?
Heating the mixture ammonium chloride is decomposed after 315 oC.
How do you separate ammonium chloride and sulphur from its mixture?
Ammonium chloride is soluble in water, sulphur isn't. So mix the mixture with water and filter out the sulphur. Now evaporate the filtrate to obtain the ammonium chloride and permit the sulphur to dry.
