0
What else can I help you with?
Separate sulfur and sugar from a mixture?
To separate sulfur and sugar from a mixture, you can use a process called filtration. First, dissolve the sugar and sulfur mixture in water; then filter the mixture. The sugar will pass through the filter paper while the sulfur remains behind.
Separate elemental sulfur from sugar?
melting temperature of sugar is 145 C and sulfur is 115 C there is 30 C melting temperature difference so we can melt sulfur easily to separate from sugar. take a bowl and add mixture, set the bowl in oven and set 115 C for one or two minutes. after the time pass. immediately pour the melted sulfur into another bowl with hanger. you will get some elemental sulfur some will solidify do this again at least you gain all elemental sulfur.
What could you use to separate sulfur and iron?
You can use a magnet to separate iron from sulfur since iron is magnetic while sulfur is not. By using the magnet to attract the iron particles, you can separate them from the sulfur.
How could you separate iron and sulfur?
If it is a simple mixture of Fe and S you can use a magnet to separate iron. Of course, the method is not valid for an iron sulphide.
How do you separate sulphur from roll sulfur and carbon?
To separate sulfur from roll sulfur and carbon, you can use a process called sublimation. In this process, the mixture is heated under controlled conditions, causing the sulfur to sublime and separate from the carbon. The sulfur vapor is then cooled and condensed back into solid sulfur.
Separate sulfur and sugar from a mixture?
To separate sulfur and sugar from a mixture, you can use a process called filtration. First, dissolve the sugar and sulfur mixture in water; then filter the mixture. The sugar will pass through the filter paper while the sulfur remains behind.
Separate elemental sulfur from sugar?
melting temperature of sugar is 145 C and sulfur is 115 C there is 30 C melting temperature difference so we can melt sulfur easily to separate from sugar. take a bowl and add mixture, set the bowl in oven and set 115 C for one or two minutes. after the time pass. immediately pour the melted sulfur into another bowl with hanger. you will get some elemental sulfur some will solidify do this again at least you gain all elemental sulfur.
What could you use to separate sulfur and iron?
You can use a magnet to separate iron from sulfur since iron is magnetic while sulfur is not. By using the magnet to attract the iron particles, you can separate them from the sulfur.
How do you separate a mixture of sugar and sulphur?
To separate a mixture of sugar and sulfur, you can use water to dissolve the sugar while leaving the sulfur undissolved. First, add water to the mixture and stir, allowing the sugar to dissolve completely. Then, filter the mixture; the dissolved sugar will pass through the filter paper, while the sulfur remains on the paper. Finally, evaporate the water from the collected solution to obtain the sugar.
What are the steps to separating sulfur iron and sugar?
To retrieve the iron just use a magnet. To retrieve the sulphur just put the remaining mixture in water and dissolve it. Then using a filter paper filter the solution, the sulphur which is not soluble will remain on the filter paper and to retreive the sugar from the solution just re-crystallize it.
How could you separate the components of a charcoal and sugar?
To separate charcoal and sugar, one method could involve adding water to the mixture and stirring, which would dissolve the sugar but leave the charcoal behind. Next, the mixture could be filtered to separate the dissolved sugar solution from the charcoal residue. Finally, the water could be evaporated to retrieve the sugar.
How can you separate a mixture of sulferplus sand plus sugar plus ironfillings?
Magnets would remove the iron. sugar is water soluble now you have sulfur and sand mixed. Apply heat sulfur will burn before the sand.
How could you separate iron and sulfur?
If it is a simple mixture of Fe and S you can use a magnet to separate iron. Of course, the method is not valid for an iron sulphide.
How could you separate a mixture of sugar and white sand.?
Dissolve the sugar in water and then evaporate the water
How do you separate sulphur from roll sulfur and carbon?
To separate sulfur from roll sulfur and carbon, you can use a process called sublimation. In this process, the mixture is heated under controlled conditions, causing the sulfur to sublime and separate from the carbon. The sulfur vapor is then cooled and condensed back into solid sulfur.
If a soft drink contains high concentrations of sugar if cooled what could happen?
the crystals of sugar separate out..
How do you separate flour sand and sulfur?
To separate flour, sand, and sulfur, you can use a combination of techniques. First, use a sieve to separate the sand from the flour. Next, mix the remaining mixture with carbon disulfide to dissolve the sulfur. After the sulfur has dissolved, filter the mixture to separate the sulfur solution and the leftover flour particles.
