answersLogoWhite

0

Oil skimmers, which are pieces of equipment that allow the operator to remove oil and other products from the surface of a liquid, are mostly used as a way to clean lakes and rivers from oil products.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Earth Science

When crude oil is pumped out of the ground is there anything put in the ground to replace it?

In some cases, secondary or enhanced oil recovery techniques may be employed where materials like water, gas, or polymers are injected into the reservoir to help maintain pressure and displace oil. However, not all oil wells use this method and naturally occurring pressure in the reservoir can also help in oil extraction.


What is PDO amal steam project?

The PDO Amal Steam Project involves the development of steam injection facilities to enhance oil recovery in the Amal oil field located in Oman. The project aims to increase oil production by injecting steam into the reservoir to reduce viscosity and improve oil flow. This enhanced oil recovery method helps to maximize the extraction of oil from mature fields.


How much of the oil in a reservoir is actually mined from a well?

Typically, only a fraction of the oil in a reservoir is actually recovered through the drilling of wells. The percentage of recoverable oil, known as the recovery factor, can vary widely depending on factors such as the geology of the reservoir, the technology used, and the efficiency of extraction methods. On average, recovery factors range from 10% to 40% globally.


What are 3 ways to get oil from the earth?

Three common methods to extract oil from the earth are drilling wells, using hydraulic fracturing (fracking), and employing enhanced oil recovery techniques such as steam injection or chemical injection.


What are 3 methods used to get oil from the earth?

Three methods used to extract oil from the earth are drilling wells, hydraulic fracturing (fracking), and using enhanced oil recovery techniques such as steam injection or water flooding.

Related Questions

Are oil skimmers used in all countries?

Oil skimmers are not used in all countries around the world. However, most oil drilling operations in North America and Europe are required to have oil recovery equipment available, and oil skimmers are one type of equipment that meets this requirement.


what are skimmers used for oil spill clean up?

None. Skimmers are mechanical devices, which use the surface tension of the oil to pull oil into a boat.


What is the function of fryer skimmers?

The function of skimmers is to remove small pieces of food and batter that have already cooked so they do not contaminate the oil.


When is it essential to take measures to help release trapped refrigerant from the compressor oil during recovery?

During the entire recovery operation


When is it essential to take measures to help release trapped refrigerant from the compressor oil during refrigerant recovery?

During the entire recovery operation


When is essential to take measures to help release trapped refrigerant from the compressor oil during refrigerant recovery?

During the entire recovery operation


When is it essential to take measures to help release trapped refrigerate from the compressor oil during refrigerant recovery?

During the entire recovery operation


Can the oil spill be sucked up from ocean surface?

Skimmers have limitations. It is very hard to skim off oil if oil is continuing to flow from the well. However, the skimmers are being employed at the most critical areas of the spill where they can be most effective, in hopes of reducing environmental damage. See related links.


What materials clean oil spills?

You can use a lot of things to clean up oil spills but the best thing to clean up an oil spill is to use a sponge.


Describe two secondary recovery processes Why are such processes important?

Two secondary recovery processes are water flooding and gas injection. Water flooding involves injecting water into the reservoir to help displace oil towards the production wells. Gas injection, like CO2 or natural gas, helps maintain reservoir pressure and decrease oil viscosity for easier recovery. These processes are important as they can help recover additional oil that was left behind after primary recovery methods, ultimately increasing the overall oil production from a reservoir.


Whose responsibility is it to revers the effects of the oil spill?

The operator of a drilling operation, (BP in this case), has primary clean up responsibilities. Only a small fraction of the oil that came from the Macondo well can be recovered by skimmers and burning. The governmental agencies, primarily the EPA and NOAA, are working with BP in the recovery process. The recovery process takes time, and environmentalists will have differing opinions whether the damage can be "reversed" but there will be some degree of ecosystem recovery. Over time, the lighter components of oil evaporate, and the remaining oil will break into small tar balls which are dispersed by wind, wave action and currents. In this way, nature helps the ecosystem recover.


When is it essential to take measures to help release refrigerant from the compressor oil during refrigerant recovery?

It is essential to take measures to help release refrigerant from the compressor oil during refrigerant recovery when the refrigerant release valve is stuck closed. The release valve should be maintained at all times.