Press O/mem down, while holding it, press the button that you press when checking a temp. On the LCD you should see C - 5, press it until it shows F degrees. (May have to press button until C - 5 appears, which I had to, 5 times) I have an older model, and that is how I can change it.
Changing the temperature scaleYour Braun ThermoScan is shipped with theFahrenheit temperature scale activated. If youwish to switch to Celsius «°C», proceed as follows:Make sure the thermometer is turned off.Press and hold down the «I/O» button. After about3 seconds the display will show this sequence:«°F» / «SET» / «°C» / «SET» ...Release the «I/O» button when «°C» is shown.There will be a short beep to confirm the new setting,then the thermometer is turned off automatically.When turned on again, temperatures will be shownin Celsius, until the above procedure is repeated.
Changing the temperature scale This thermometer is shipped with the Fahrenheit temperature scale activated. If you wish to switch to Celsius (°C), proceed as follows: • Turn on the thermometer. (If it is already turned on, make sure it is not in memory mode.) • Press the /mem button and keep it pressed. Then press and release the activation button to switch over to the «change temperature scale» mode. • By pressing the activation button again, the Celsius scale is activated, «°C» is displayed on the LCD. Each further pressing of the activation button toggles the scale between °C and °F. • Release the /mem button to return to the ready symbol . All temperatures stored in memory will automatically be converted to the selected scale when displayed on the LCD. IRT 3020
Changing the temperature scaleYour Braun ThermoScan is shipped with the Celsius(°C) temperature scale activated. If you whish toswitch to Fahrenheit (°F) and/or back from Fahrenheitto Celsius, proceed as follows:(1) Make sure the thermometer is turned off.(2) Press and hold down the «start» button (IRT 4020)or the «I/O» button (IRT 4520). After about 3seconds the display will show this sequence:«°C» / «SET» / «°F» / «SET» ...(3) Release the «start» button / «I/O» button when thedesired temperature
To change a SpongeBob thermometer from Celsius to Fahrenheit, press and hold the power button until the screen displays either "F" or "C." Release the button once your desired unit of measurement appears. The thermometer will now display temperatures in Fahrenheit.
36.9 degrees Celsius is equivalent to approximately 98.4 degrees Fahrenheit on a thermometer.
Changing the temperature scaleYour Braun ThermoScan is shipped with theFahrenheit temperature scale activated. If youwish to switch to Celsius «°C», proceed as follows:Make sure the thermometer is turned off.Press and hold down the «I/O» button. After about3 seconds the display will show this sequence:«°F» / «SET» / «°C» / «SET» ...Release the «I/O» button when «°C» is shown.There will be a short beep to confirm the new setting,then the thermometer is turned off automatically.When turned on again, temperatures will be shownin Celsius, until the above procedure is repeated.
multiply the degree in C by 1.8 then add 32. this will give u the temperature in F. F = (C*1.8) +32
Changing the temperature scale This thermometer is shipped with the Fahrenheit temperature scale activated. If you wish to switch to Celsius (°C), proceed as follows: • Turn on the thermometer. (If it is already turned on, make sure it is not in memory mode.) • Press the /mem button and keep it pressed. Then press and release the activation button to switch over to the «change temperature scale» mode. • By pressing the activation button again, the Celsius scale is activated, «°C» is displayed on the LCD. Each further pressing of the activation button toggles the scale between °C and °F. • Release the /mem button to return to the ready symbol . All temperatures stored in memory will automatically be converted to the selected scale when displayed on the LCD. IRT 3020
Changing the temperature scaleYour Braun ThermoScan is shipped with the Celsius(°C) temperature scale activated. If you whish toswitch to Fahrenheit (°F) and/or back from Fahrenheitto Celsius, proceed as follows:(1) Make sure the thermometer is turned off.(2) Press and hold down the «start» button (IRT 4020)or the «I/O» button (IRT 4520). After about 3seconds the display will show this sequence:«°C» / «SET» / «°F» / «SET» ...(3) Release the «start» button / «I/O» button when thedesired temperature
A dial stem thermometer typically ranges between -50°F to 500°F (-45°C to 260°C).
Depends on the scaling on the thermometer. 0°C 273.16K 32°F 459.67°R
Well it is the same as what you measure a thermometer with which is Celsius and Fahrenheit which is C and F
212°F is equivalent to 100°C. Therefore, a centigrade thermometer would also show 100°C when a Fahrenheit thermometer reads 212.
A dial stem thermometer typically ranges between -18°C to 260°C (-1°F to 500°F). It is important to check the specific range of the thermometer you are using to ensure accurate readings within its limits.
The two main lines on a thermometer are the freezing point (32°F or 0°C) and the boiling point (212°F or 100°C) of water. These lines help calibrate the temperature scale.
To change a SpongeBob thermometer from Celsius to Fahrenheit, press and hold the power button until the screen displays either "F" or "C." Release the button once your desired unit of measurement appears. The thermometer will now display temperatures in Fahrenheit.
"F" stands for Fahrenheit and "C" stands for Celsius on a thermometer. These symbols indicate the units of measurement being used to display the temperature.