You do not measure the Chlorine in a Baquacil pool because they are incompatible.
No, bromine is not the same as baquacil. Bromine is a chlorine alternative, probably more expensive, effective as a sanitizer. Can result in odors as with chlorine and there are arguements about its safety, health wise. No, Baquacil is Hydrogen Peroxide.
No, you should not mix chlorine with Baquacil as they are not compatible chemicals. Mixing them together can cause a chemical reaction that may produce harmful or toxic fumes, and could also reduce the effectiveness of both products in maintaining water quality. It's best to follow the manufacturer's recommendations for each product separately.
To clear up a chemical reaction caused by mixing Baquacil and chlorine shock, immediately ventilate the area, evacuate if necessary, and avoid inhaling the fumes. Flush the affected area with water to dilute the chemicals, and seek medical attention if you experience irritation or symptoms of exposure. It's important to never mix Baquacil and chlorine shock as they can react and release harmful gases.
I would like to convert to chlorine. Can you post the instuctions here? Wait for what? As soon as you have made your mind up to change, just do it. The baquacil won't go away on its own. Nor will the slime and gunk it leaves in your filter. For instructions as to how to convert from baqucil to chlorine, or saline system - e-mail me and I will send by attachment.
There could be several reasons why a pool may have no chlorine. This could be due to insufficient chlorine added to the pool, the chlorine being depleted too quickly, or the pool's filtration system not functioning properly. It's important to regularly test and maintain the chlorine levels in a pool to ensure proper sanitation.
The only reason the pool would turn green would be if the Baquacil is not entirely out of the pool and it reacts with the Chlorine.
Yes, you can shock a pool that uses Baquacil, but it requires special attention. Standard chlorine shock treatments cannot be used, as they can react negatively with Baquacil, which is a non-chlorine sanitizer. Instead, you should use a non-chlorine shock specifically designed for Baquacil systems to effectively manage water clarity and sanitation without causing damage. Always follow the manufacturer's instructions when shocking a Baquacil pool.
You first have to convert the pool to a chlorine system As a salt water system is a chlorine system.
I have been using Baquacil for 18 years in an in-ground pool. I used chlorine in an above ground pool prior. The cost difference is obvious. Starting off new, Baquacil is very expensive. As the years go on, the cost of the sanitizer drops dramatically because of the baquacil buildup in the water. You dont have the chlorine smell and the eye burning. I recommend washing the baquacil from your hair since the hair tends to get heavy after swimming. Foaming is also a problem with baquacil. I still prefer baquacil and intend to use it after I install a new liner next year.
That means Chlorine was added before the Baquacil readings had reached zero.
To switch from chlorine to Baquacil, start by discontinuing the use of chlorine products and wait for chlorine levels to drop to zero. Test the water for chlorine and pH levels before adding Baquacil according to manufacturer's instructions. It may also be necessary to clean or replace the filter system to prevent any residual chlorine from affecting the Baquacil effectiveness.
If you read the directions from baquacil you will find that yes you can indeed change from baquacil to chlorine. It is extremely important that you use up all the baquacil product and eliminate it from your pool prior to adding the chlorine. I have successful changed over two different systems and chlorine is much less expensive.
Go to the site link bellow for a guide to converting from baquacil to chlorine. Keep in mind that if you have a sand filter you will have to also change the sand in it as it will harbor traces of baquacil.
Baquacil pool care systems try following the link below
"Shocking" a baquacil pool. It is a non-chlorine Oxidizer used to help maintain good water clarity by oxidizing organtic compounds in the water from swimmer and other enviornmental debris.
Keep the acid content too high for a while and a lit of staining will tend to get bleached out.
To get rid of algae in a Baquacil pool, the best thing to use is the Performance Algaecide. The algae will actually get worse if converting because you have to wait until the Baqua reading is at zero before converting which could take at least several days because the Oxidizer is designed to last for an entire month. I can send you instructions by e-mail re converting from baquacil to chlorine and/or the saline system. E-mail me. What is your email address?