Propane has a heat content of 19,900 btu/lb net. This means that a 36000 btu/hr heater needs to burn 1.809 lbs of propane per hour to produce this amount of heat. A 40 lb bottle will last about 22 hours if the heater runs continuously.
The hourly fuel burn rate for a Boeing 777-300ER can vary depending on factors such as the weight of the aircraft, altitude, speed, and weather conditions. On average, it can range from 6,000 to 7,000 pounds of fuel per engine per hour.
A Boeing 727 typically burns about 6,800 pounds of fuel per hour during flight. The actual fuel consumption can vary depending on factors such as the length of the flight, payload, altitude, and weather conditions.
The average rainfall rate in inches per hour in our region is 0.25 inches per hour.
The record rainfall in one hour for the region was 12 inches.
Earth Hour 2010 was estimated to have saved around 700 megawatt hours of electricity worldwide. This is roughly equivalent to the energy consumed by 300,000 homes in an hour.
propane has 21,548 BTU per pound so about 2 1/2 pounds per hour remember that propane is stored in a liquid and you need a big enough tank to allow the propane to change from a liquid to gas.
Propane heaters cost less to run per hour.
The amount of propane burned in a propane fireplace can vary based on factors such as the size of the fireplace, its energy efficiency, and how long it is used. On average, a propane fireplace can burn approximately 1 to 2 gallons of propane per hour of operation.
The amount of propane a 400,000 BTU pool heater will use depends on factors like the heater's efficiency and the temperature you desire. On average, a 400,000 BTU pool heater can consume around 4-5 gallons of propane per hour when running at full capacity.
form_title=Swimming Pool Heater Installation or Replacement form_header=11613 Please select the type of pool that needs to be heated*= () Above ground () Spa/hot tub () In ground What type of heater would you like to use? (Select all that apply)*= [] Natural-gas fired [] Propane-gas fired [] Electric [] Heat pump [] Solar heater [] Want recommendation Is the pool indoor or outdoor?*= () Indoor () Outdoor
The amount of propane used for an above ground pool heater in Pennsylvania will vary depending on factors such as the heater's size, efficiency, frequency of use, and the temperature you set. On average, a propane pool heater can consume around 1-3 gallons per hour of operation, so for a season (roughly 3-4 months), you could estimate anywhere from 200-400 gallons of propane. It's best to monitor your usage to get a more accurate estimate.
$36000/2080 hours a year = 17.308 an hour
A pilot light in a typical gas appliance burns about 600-900 BTUs (British Thermal Units) of propane per hour.
52x40=2080 36000/2080=17.307692Approx: 17.30 an hour
A 20 pound propane tank holds 4.1 gallons of LP which equates to about 0.016 cubic meters. If your heater burns 3 m3 per hour the tank will last about 19 seconds. If you meant .0003 then it will last 51.73 hours.
Propane has an energy content of approximately 91,500 British Thermal Units (BTUs) per gallon. When converted to BTUs per hour, the amount depends on the rate of consumption; for example, a typical propane heater might consume about 1 gallon per hour, producing around 91,500 BTUs per hour. The exact BTU output can vary based on the efficiency of the appliance and its specific design.
A 10,000 BTU heater will use about 1/2 pound of propane per hour. Conversions to different types of energy being used (ie steam, KwH, etc.) will vary the answer, as will variations such as leaks, 02, temperature setting, efficiency, etc.