answersLogoWhite

0

Ethyl acetate is generally a good solvent for TLC.  It is more polar than hexanes, but less so than acetone, alcohols, acids, and water.  If you are doing a reaction for the first time and have no idea what solvent system to use for TLC, varying ratios of hexanes:ethyl acetate is always a good starting point (try 3:1, 2:1, 1:1, 1:2. 1:3, etc).

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Earth Science

How do you make a 3M HCl solution in Ethyl acetate?

To make ethyl acetate, react ethanol with ethanoic acid in the presence of concentrated sulphuric acid. Another method is by preparing industrially using the Tishchenko reaction by combining two equivalents of acetaldehyde in the presence of an alkoxide catalyst.


How do you remove moisture from ethyl acetate?

You can remove moisture from ethyl acetate by using drying agents such as anhydrous magnesium sulfate or molecular sieves. Simply add the drying agent to the ethyl acetate, stir or shake the mixture, and then filter the solution to remove the drying agent. This process will help remove any remaining moisture present in the ethyl acetate.


Which household products have the highest emission of ethyl benzene?

Ethyl benzene is most commonly found in: coal tar, petroleum, ink, pesticides, and paint. Answer: You may be exposed to ethylbenzene from the use of:* Gasoline * Tobbacco products * From its use as a solvent in: - pesticides- carpet glues- varnishes- paints


Is it possible to change iron acetate into iron oxide using easily accessible materials and techniques?

Yes, it is possible to convert iron acetate into iron oxide using simple procedures. You can do this by heating the iron acetate in air at a high temperature, which will result in the decomposition of iron acetate and the formation of iron oxide. This process can be done using a regular household oven or a hot plate.


How do you prepare acetate buffer pH 3.5?

Dissolve 25g of Ammonium acetate in 25ml of water and add 38ml of 7M hydrochloric acid. Adjust the pH of the solution to 3.5 with either 2M hydrochloric acid or 6M ammonia and dilute with water to 100ml

Related Questions

What dissolves PLA and how can it be effectively removed from surfaces?

Polylactic acid (PLA) can be dissolved by using a solvent such as acetone or ethyl acetate. To effectively remove PLA from surfaces, you can soak the object in the solvent or use a cloth soaked in the solvent to wipe the PLA away. Make sure to follow safety precautions when using solvents.


How do you break down caffeine?

There are many different methods to remove the caffine. one way is below, it is a long process and not easy. It would be much easier to just buy decaf at your local market.In the direct method the coffee beans are first steamed for 30 minutes and then repeatedly rinsed with either methylene chloride or ethyl acetate for about 10 hours. The solvent is then drained away and the beans steamed for an additional 10 hours to remove any residual solvent. Sometimes coffees decaffeinated using ethyl acetate are referred to as naturally processed because ethyl acetate can be derived from various fruits or vegetables. However for the purpose of decaffeination it is not generally possible to create such a large quantity of ethyl acetate, thus the chemical is synthetically derived.WOW Gouch53 you are a brainiact i didn't even know you could.-Lovestinks10


What is the RF value for paracetamol?

That depends on many factors including the elution solvent used, the type of TLC plate used, etc.. When using .5% of acetic acid in ethyl acetate as your elution solvent and on a plastic backed plate, the Rf-value should be around 79.82%


What is the Rf value of salicylamide?

It will depend on the solvent system you are using.


How do you make a 3M HCl solution in Ethyl acetate?

To make ethyl acetate, react ethanol with ethanoic acid in the presence of concentrated sulphuric acid. Another method is by preparing industrially using the Tishchenko reaction by combining two equivalents of acetaldehyde in the presence of an alkoxide catalyst.


How do you separate mixture of methanol and ethyl acetate?

You can separate a mixture of methanol and ethyl acetate by using fractional distillation. Since they have different boiling points (methanol: 64.7°C, ethyl acetate: 77.1°C), you can heat the mixture to a temperature between the two boiling points to selectively vaporize and collect each component.


What would the result be if while carrying out TLC chromatography you used a solvent of 200 is to 1 ethyl acetate and aqueous ammonia instead of 200 is to 1 ethyl acetate and acetic acid?

Using ammonia instead of acetic acid as the aqueous component in the solvent mixture for TLC could result in different selectivity and polarity interactions between the stationary and mobile phases. The choice of ammonia may affect the separation efficiency and resolution, leading to different migration distances and spots on the TLC plate compared to using acetic acid. It is important to consider how the change in solvent composition may impact the separation of the compounds being analyzed.


How do you remove moisture from ethyl acetate?

You can remove moisture from ethyl acetate by using drying agents such as anhydrous magnesium sulfate or molecular sieves. Simply add the drying agent to the ethyl acetate, stir or shake the mixture, and then filter the solution to remove the drying agent. This process will help remove any remaining moisture present in the ethyl acetate.


Why it is more useful to make ethyl acetate with acetic acid and alcohol rather than using other compounds like ketene alcohol or acetamide alcohol?

The reaction between acetic acid and alcohol to produce ethyl acetate is a simple and cost-effective process. These starting materials are readily available and less hazardous compared to using ketene or acetamide, which are more complex and toxic. Additionally, the acyl substitution reaction between acetic acid and alcohol is more selective and yields higher purity of ethyl acetate.


How does twinings decaffeinate their tea?

Twinings decaffeinates their tea using a process called the ethyl acetate method. In this method, the tea leaves are steamed to open their pores, then rinsed with ethyl acetate to remove caffeine. Ethyl acetate is a solvent that selectively binds to caffeine molecules, leaving the other compounds in the tea intact. The tea leaves are then dried to remove any remaining solvent, resulting in decaffeinated tea.


How can you remove water from ethyl acetate by using inorganic salt?

Depending on the Quantity of ethyl acetate, use a DESSICATOR. In the bottom of the dessicator place a crucible of phosphorus pentoxide put in the perforated separating try. In another crucible put in the 'wet' ethyl acetate', on top of the separating try. Using silicon grease, grease the edges of the dessicator bowl and the dessictor lid. Place the lid on the bowl so that it snugly fits. The dessicotor lid should have an evacuation value, to which attached a gas tight, but flexible hose, and the other end to the evacuation pump. Turmn the pump on and leave for say 24 hours. , until the phosphorus pentoxide goes black. This should dry out the ethyl acetate, suitabloe for IR or nmr analysis. Another way, is to put the sample in a 'Muffle Furnace' at about 95 oC. However, this might thermally decompose the ethyl acetate. NB To dispose of the phosphorus pentoxide safely, slowly place spatula amounts in flowing cold water. NNB Whilst phosphorus pentoxide is NOT a salt, it will absorb water. A salt to try is anhydrous calcium chloride.


What is Rf value of o-nitroaniline?

The Rf value will vary some depending on the exact conditions. Using a silica plate and a moderately polar solvent (dichloromethane or a mixture of toluene/ethyl acetate) you will get an Rf of 0.4-0.5.