0
What else can I help you with?
Including sea level how many contour lines would be needed to show an island 125 feet high on a map with a contour interval of 20 feet?
A contour line every 20 feet would be needed to show the island's elevation of 125 feet. This means there would be five contour lines: one at sea level, then at 20, 40, 60, 80, 100, and 120 feet.
Boiling point of water at 4500 feet?
At sea level water boils at 212 degrees Fahrenheit. For every 500 feet above sea level, water boils about at 0.9F less. So at 4600 feet water would boil at 203.72 degrees Fahrenheit. (212-((0.9/500)*4600) means: normal boiling point (212 degrees) subtract 0.9 degrees per 500 feet (0.9/500) multiplied by elevation (4600 feet).
Why there is a decrease of temperature of 0.6 degree in each 100 m from the sea level?
The decrease in temperature with an increase in elevation is known as the lapse rate. As you move higher above sea level, the air pressure decreases, causing the air to expand and cool down. This cooling effect is why the temperature drops by an average of 0.6 degrees Celsius per 100 meters of elevation gain.
Why can you have the same type of contour line above and below sea level?
Contours are lines connecting points of equal elevation on a map. If you have the same type of contour line both above and below sea level, it means that the elevation increase or decrease is consistent. For example, if you have a contour line at 100 meters above sea level and another at 50 meters below sea level, the difference between them is still 150 meters, even though one is above sea level and the other is below.
How many degrees does the temperature decrease as you increase elevation?
On average, the temperature decreases by about 3.5°F for every 1,000 feet increase in elevation. This concept is known as the environmental lapse rate. However, the actual rate at which temperature decreases with elevation can vary based on local conditions and geographic location.
What is the elevation/sea level of flordia?
100 feet above sea level
Which state has lower average elevation-Arkansas or Florida?
Definitely Florida. Florida's average elevation is 100 feet (30 meters) above sea level while Arkansas's average elevation is 650 feet (200 meters) above sea level
What is the elevation of Louisana?
The highest point in the state is 535 feet above sea level. It is Driskill Mountain in the northern part of the state. The lowest point is in New Orleans, and it is 8 feet below sea level. The average elevation of the state is 100 feet above sea level.
Can a contour line on a topographic map connect a point with an elevation of 100 feet to a point with an elevation of 110 feet?
No. Contour lines connect points of the same elevation
What is the difference between 100 below sea level and 100 above sea level?
Being 100 feet below sea level means you are situated underwater, in a submerged location. Being 100 feet above sea level means you are located higher in altitude, above the water level.
What is the elevation of Cathedral City CA?
Cathedral City, California is 328 feet (100 meters) above sea level
How many level Louisiana is above sea level?
Louisiana's average elevation above sea level is about 100 feet (30 meters), with the highest point in the state being Driskill Mountain at 535 feet (163 meters). Louisiana is known for its flat topography, with most of the state's land lying just slightly above sea level.
What is the Karachi height above sea level?
Karachi is at an average elevation of 8 meters (26 feet) above sea level.
What is the elevation of the Arizona Diamondbacks baseball diamond?
Chase Field sits at close to 1, 100 feet above sea level.
Why can a contour line on a topographic map connect a point an elevation of 100 feet to a point with an elevation of 110 feet?
because
Which state has a lower average elevation Arkansas or Florida?
Florida has a lower average elevation than Arkansas. Florida's average elevation is approximately 100 feet, while Arkansas's average elevation is around 650 feet.
What is the elevation of Edison NJ?
Edison, New Jersey, has an elevation of approximately 100 feet (30 meters) above sea level. This relatively low elevation is typical for many areas in the northeastern United States. The town's elevation contributes to its generally flat terrain and accessibility.
