0
What else can I help you with?
How deep is Hudson Bay?
About 330 ft (100 m) Max depth. 900 ft (270 m)
How deep are tar pits?
Tar pits can range in depth from a few feet to over 100 feet deep. The depth depends on various factors such as the geology of the area and the amount of sediment accumulation over time.
How many feet below sea level equals 10 Bar?
1 Bar represents one atmosphere of air pressure. 10 Bar is approximately equal to 100 Meters of water depth. 1 meter = 3.28083989501 feet. It follows that 100 meters = 328.083989501 feet. Therefore, 10 Bar is approximately equal to the expected pressure at 328.083989501 feet of water depth (not sea level).
What is the average temperature of an oil well?
The average temperature of an oil well can vary depending on the location and depth of the well. However, oil wells typically have temperatures ranging from 100 to 300 degrees Fahrenheit.
What is the depth of the deep well?
The depth of a deep well can vary depending on factors such as location and purpose, but deep wells typically range from 100 to 1,000 feet deep or more. The depth is determined based on factors such as water table levels, geological conditions, and the need to access water resources.
What would be the volume of gas at the depths of 100 feet?
The volume of gas at a depth of 100 feet would depend on the pressure and temperature at that depth. As pressure increases with depth, gas volume decreases. To calculate the exact volume, you would need to know the specific pressure and temperature conditions at that depth.
How many feet of depth is 100 atmospheres?
660 feet
What is the deepest point of the Ganges?
The average depth of the river is 52 feet and the maximum depth at various points is 100 feet.
How deep is .55 acres that is 100 ft. wide?
To find the depth of a 0.55-acre piece of land that is 100 feet wide, first convert acres to square feet. There are 43,560 square feet in an acre, so 0.55 acres is approximately 23,928 square feet. Since the width is 100 feet, you can calculate the depth by dividing the total area by the width: 23,928 square feet ÷ 100 feet = 239.28 feet. Thus, the depth is approximately 239.28 feet.
What is the integer that represent the depth of 100 feet?
The integer that represents the depth of 100 feet it -100 because depth means negative and it also means below sea level so above sea level is positive and below sea level is negative so your answer will be negative 100.
What is the lake depth of Walker Lake?
100 feet or so...
How deep is the deepest part of the Ganges?
The average depth of the ganga river is 52 feet (16 m) and the maximum depth is 100 feet (30 m)
How far is 100 fathoms?
A fathom is 6 feet in depth. 100 fathoms is therefore 600 feet, or 200 yards or 182.8 metres.
What is Cave of the winds' Elevation?
130 feet (40m) high, 100 feet (30m) wide and 30 feet (9m) in depth
How much rock to cover an area 2 feet wide by 50 feet long?
100 cubic feet for every foot of depth.
How deep is Hudson Bay?
About 330 ft (100 m) Max depth. 900 ft (270 m)
What are purse seines?
Purse seines, a type of large net closed by a drawstring-like apparatus, were capable of dropping to a depth of 100 feet and enclosing an area 100 feet across.
