0
bacteria is used to remove sulphur from oil - true answer + Family Guy rules
What else can I help you with?
Does oil produce sulphur dioxide?
When its burntAnswer:Oil comes in many "flavours". High sulfur (sour) crude oil is usually processed to remove sulfur from the product streams. The sulfur is then sold to the chemical industry as product. If the unrefined sour crude were burned it would release sulfur dioxide. The "sweet" or sulfur free products do not release sulfur oxides.Some heavy grades of marine and industrial fuel oils do contain sulfur. If used in the ocean the sulfur is absorbed by the ocean water with a high dilution. Industrial burners all have sulfur removal systems on their stacks.
Sulfur dioxide forms from the burning of what?
Burning sulfur in oxygen produces sulfur dioxide.
How is sulfur dioxide produced from burning fossil fuels?
Sulphur is contained in most fossil fuels, it burns as well. Answer: Sulfur in fossil fuels is present as sulfides, disulfides and mercaptans. The followig ist is brief comparison of the expected (nonnumeric) amounts to be expected by fuel type: * Coal - Low to High Sulfur content* Bunker Oil - Low to High Sulfur content* Heavy Diesel - Low to High Sulfur content * Diesel/Furnace oil - Low sulfur* Gasoline - Low sulfur * Butane - Low sulfur (a few ppm as odorant )* Propane - Low sulfur (a few ppm as odorant ) * Methane - Low sulfur (a few ppm as odorant ) * Natural Gas - Low sulfur (a few ppm as odorant ) * Sour Natural Gas - High sulfur* Refinery Off Gases - Low to High Sulfur content
Why is crude oil from the ground or seabed not very useful as a product itself?
Crude oil in its natural state is not very useful because it contains impurities such as sulfur, nitrogen, and metals that need to be removed before it can be turned into usable products like gasoline, diesel fuel, and plastics. Additionally, crude oil needs to be refined to separate it into different components with specific properties.
What is the ore for sulfur?
Sulfur is not typically mined as an ore; it is usually extracted as a byproduct from natural gas and oil refining processes. However, elemental sulfur can also be found in its pure form near volcanic areas or in areas with hot springs.
How is flower of sulfur used on animals?
Flower of sulfur is used to treat skin problems, such as "scratches" on horses. It's commonly mixed with mineral oil and applied directly to the sores. "MTG" is a brand name of a mixture of flower of sulfur and mineral oil.
Ten mixtures and the way to separate?
Salt and sand: Use filtration to separate the mixture. Alcohol and water: Distillation can be used to separate the two liquids based on their boiling points. Iron filings and sulfur: Use a magnet to separate the iron filings, then heat the remaining mixture to vaporize the sulfur. Oil and water: Separating funnel can be used to separate the immiscible liquids based on their density. Sugar and water: Evaporate the water to leave behind the sugar. Sand and gravel: Sieving can be used to separate the different-sized particles. Mixture of different dyes: Chromatography can be used to separate the dyes based on their solubility. Air: Fractional distillation can be used to separate the components of air such as nitrogen, oxygen, and argon. Salt water: Distillation can be used to separate the salt from water by evaporating the water and collecting the salt residue. Oil and vinegar: Centrifugation can be used to separate the two liquids by their different densities.
What is the name of the process that is used to separate crude oil?
The process used to separate crude oil is called fractional distillation. In this process, crude oil is heated to separate it into its component parts based on their boiling points.
How Does sulfur dissolve in oil?
Sulfur dissolves in oil due to the weak intermolecular forces between the sulfur atoms and the oil molecules, resulting in a homogenous mixture. The solubility of sulfur in oil can be influenced by factors such as temperature, pressure, and the chemical nature of the oil.
Can physical method be used to separate molecules in crude oil?
Yes. Oil is a mixture so physical methods are appropriate. Fractional distillation is the physical process used in oil refineries to separate the oil into different, saleable parts.
How you could reduce the sulfur in the fuel content to be used in the power plant?
If the fuel is coal, you simply have to switch to a coal with a lower sulfur content. You can remove the SOx from the flue gas with ammonia scrubbing. If the fuel is fuel oil a lower sulfur fuel oil can be used. Otherwise the oil must be treated in a hydrodesulfurization unit which is probably not economical due to the hydrogen required. If the fuel is natural gas, sulfur can be absorbed by absorption with a sulfur free amine such as MDEA (monodiethanolamine). The sulfur is later removed from the amine during the amine regeneration process which results in a sulfur rich stream.
What is the name of the process used to separate crude oil into products like petrol?
The process used to separate crude oil into products like petrol is called fractional distillation. It involves heating crude oil to separate it into different components based on their boiling points.
Does oil produce sulphur dioxide?
When its burntAnswer:Oil comes in many "flavours". High sulfur (sour) crude oil is usually processed to remove sulfur from the product streams. The sulfur is then sold to the chemical industry as product. If the unrefined sour crude were burned it would release sulfur dioxide. The "sweet" or sulfur free products do not release sulfur oxides.Some heavy grades of marine and industrial fuel oils do contain sulfur. If used in the ocean the sulfur is absorbed by the ocean water with a high dilution. Industrial burners all have sulfur removal systems on their stacks.
What is cesium used for?
On clock dials to flouresce in the dark. It is also used in the atomic clock. Cesium formate is sometimes used in oil drilling.
Which property is being used to separate oil and water in this way?
density
Which property of paraffin is used to separate them from crude oil?
The property of paraffin's high melting point is used to separate them from crude oil in a process called fractional distillation. Paraffin's high boiling point causes it to condense and separate from the other components of crude oil at different temperatures in the distillation column.
What physical property is used to separate crude oil into fractions?
Difference in the boiling points among different byproducts of crude oil is used to separate out each component from a mixture. Fractional distillation is used to carry out this process. This method can also be used to purify water and acetone from a mixture.
