about 90%.
Approximately 90% of an iceberg lies hidden below the surface of the water. This is due to the difference in density between ice and water, causing the iceberg to float with a significant portion submerged.
On average, about 10% of an iceberg is above the surface, while the rest (90%) is below the surface. The amount visible above the water depends on factors like the iceberg's shape, density, and buoyancy.
An iceberg above water appears as a large mass of floating ice with a distinct white or blue color. However, below the water's surface, only about one-tenth of the iceberg is visible, while the majority lies submerged. The underwater portion often has a more complex and intricate shape than what is seen above water.
Approximately 10% of an iceberg is visible above the water line, with the remaining 90% submerged below the surface. This is due to the lower density of ice compared to water, causing the iceberg to float with a significant portion hidden underwater.
Water molecules can evaporate from the surface of water, where they gain enough energy to overcome surface tension and escape into the air. Below the surface, water molecules can also evaporate through a process known as sublimation, where molecules transition directly from a solid to a gas, although this is less common.
Approximately 90% of an iceberg lies hidden below the surface of the water. This is due to the difference in density between ice and water, causing the iceberg to float with a significant portion submerged.
Since the part below the water is 7 times the size of the part above water, the total size of the iceberg can be divided into 8 equal parts (7 parts below water + 1 part above water). Therefore, the fraction of the iceberg above water is 1/8.
Approximately 90% of an iceberg lies submerged underwater, while only about 10% is visible above the surface. This phenomenon occurs because ice is less dense than water, causing the majority of the iceberg to float below the waterline. The exact fraction can vary slightly depending on the specific density of the ice and the salinity of the surrounding water.
On average, about 10% of an iceberg is above the surface, while the rest (90%) is below the surface. The amount visible above the water depends on factors like the iceberg's shape, density, and buoyancy.
1/8 of the iceberg is at the surface while the rest remains. This is an average iceberg (based on titanic)
An Iceberg Made of water but ice is lighter than water. Nine tenths of an iceberg is below the surface and so it is unseen.
Nine tenths (9/10) of an iceberg is underwater.
no. it melts An iceberg will float as long as it is in water. If you could put an iceberg in a liquid less dense than ice, the iceberg would sink.
There is 90% of an iceberg's volume (and mass) that is underwater.
Approximately 10 of an iceberg is typically visible above the water's surface.
They are chunks of floating ice drifting away from polar regions. The density of ice is just a little less than the density of sea water, so most of the volume of an iceberg is below the surface, and so a small-looking iceberg can have a huge volume of ice below the surface. The Titanic ran into an iceberg and was holed below its waterline so the water rushed in and the ship sank.
An iceberg sticks out of water like a finger. The majority of its mass is below the water's surface, with only a small portion visible above.