-17
i got this for science homework too
Dew point is essentially the temperature at which the air would become saturated. I believe to measure the dew point you would have to use a combination of a dry bulb and a wet bulb thermometer on a device called a sling psychrometer. Then take those temperature values that you get and plug them into a specific equation which I can't remember off the top of my head and/or look at a specific chart of dry bulb and wet bulb temperature values to determine the dew point.
for air water system wet bulb equals to dry bulb at 100 % relative humidity for that given temperature of air.
-9c
That means that there is 100% humidity. Normally evaporation from the wet bulb keeps its temperature lower than the dry bulb. At 100% humidity, there would be no evaporation, so they would show the same temperature.
8
For air it will be 21.1 degrees Celcius
i got this for science homework too
The filament is around 2900 to 3000 degrees Kelvin (add 273 to get Celsius). The surface of the glass envelope could be at varying temperatures, depending on the type of bulb.
In a mercury thermometer, the level of mercury falls as the temperature of the air around it cools.A mercury thermometer has a bulb of mercury at the bottom and a thin tube above it with markings in Celsius degrees or Fahrenheit degrees. When the temperature warms, the mercury expands and rises up the tube. When the temperature cools, the mercury contracts and shrinks back toward the bulb at the bottom.
answer is
Osmium, wolfram in a light bulb.
Answer:The filament inside the light bulb reaches over 3000 degree Celsius.
Tungsten has the highest melting point (3,442°C -or- 6,192°F) of all non-alloyed metals, and after carbon, it is the second highest.
Switching light on/off through loosening from socket is not advisable. Light bulb can reach at temperature between 200-260 degrees Celsius and it can be hazardous in physical contact.
thermometer consisting of mercury contained in a bulb at the bottom of a graduated sealed glass capillary tube marked in degrees Celsius or Fahrenheit; mercury expands with a rise in temperature causing a thin thread of mercury to rise in the tube
Dew point is the temperature at which the realtive humidity of a parcel of air would become 100%. So if the air is 25 degrees C and the dewpoint 15C, if that air were cooled to 15C, moisture would begin condesing out (which is how dew forms-many surfaces may be cooler than the dewpoint). Many home weather stations have two thermometers whichis what you need to measure dewpoint- calculated from the difference between wet and dry bulb temperatures. If you don't have electronic means of calculating DP you need tables.