1 meter 50X6 Cu flat= 2.68 kg
The Salar de Uyuni salt flat in Bolivia is considered one of the flattest areas on Earth. It covers over 4,000 square miles and has an average altitude variation of less than one meter, making it incredibly flat and smooth.
High heeled shoes have a smaller surface area in contact with the ground compared to flat shoes, which concentrates the wearer's weight onto a smaller area. This increased pressure causes the heels to sink deeper into soft soil. In contrast, flat shoes distribute the weight more evenly across a larger surface area, reducing the sinking effect.
The balanced chemical equation for Copper(II) Chloride is: 2 CuCl(s) + Cl2(g) → 2 CuCl2(s) It is a weak Lewis acid, and a mild oxidizing agent. It has a crystal structure consisting of polymeric chains of flat CuCl4 units with opposite edges shared. Hope that helps!
"Flat land" - flat / land "Joiners tool" - joiner's / tool
Plateaus are flat because they are formed by the erosion of softer rock layers, leaving behind a flat surface at a higher elevation.
1meter of 65*10 copper flat is 5.811Kgs.
2.207kg
The weight of a GI flat with dimensions 75x10 mm per meter length can be calculated as follows: 75mm x 10mm x 0.00785 (density of steel) = 5.8875 kg/meter.
The weight of a 100x10mm galvanized iron (GI) flat per meter length can be calculated using the formula: weight (kg) = volume (m³) × density (kg/m³). The cross-sectional area of the flat is 100mm × 10mm = 1000 mm², which is 0.001 m². The density of GI is approximately 7850 kg/m³, so the weight per meter is around 7.85 kg.
To calculate the weight per meter of a 30x3 mm mild steel (MS) flat bar, you can use the formula: weight (kg/m) = (width x thickness x density) / 1000. The density of mild steel is approximately 7850 kg/m³. For a 30x3 mm flat bar, the weight per meter would be approximately 0.706 kg/m.
Cupper flate 75x12mm kg/mtr
The weight of a 40x5mm thick MS (mild steel) flat bar per meter can be calculated by multiplying the volume (area x length) by the density of mild steel. The area of the flat bar is 40mm x 5mm = 200mm². The volume per meter would be 200mm² x 1000mm = 200,000 mm³. The density of mild steel is around 7850 kg/m³, so the weight per meter would be 200,000 mm³ x 7850 kg/m³ = 1.57 kg/m.
That does not make any sense because a ton is a measurement of weight and a square meter measures a flat area.
there is no formula discovered especially for the weight of flat
No
meter stick
300