5.89 Kg / Mtr
The weight of a 40x5mm thick MS (mild steel) flat bar per meter can be calculated by multiplying the volume (area x length) by the density of mild steel. The area of the flat bar is 40mm x 5mm = 200mm². The volume per meter would be 200mm² x 1000mm = 200,000 mm³. The density of mild steel is around 7850 kg/m³, so the weight per meter would be 200,000 mm³ x 7850 kg/m³ = 1.57 kg/m.
If it section is a rolled like beam,channel,square,angles&flat. weight=Length x unit weight unit weight of this section is=123kg/m^3 If it is plate or sheet weight=Length x width x thickness x 7.85(sp.gravity of steel)
You would use a ruler or a measuring tape to measure a 10 cm length of dialysis tubing. Make sure to lay the tubing flat on a surface and use the ruler to measure accurately from one end to the other.
To avoid parallax errors when measuring a length with a meter rule, ensure your eye is directly in line with the measurement marking on the ruler. This reduces the apparent shift in position when viewing the measurement scale. Place the ruler flat on the surface being measured and read the measurement at eye level for accuracy.
There are 1 billion nanometers in a meter. Therefore, a flat screen TV with a thickness of 150 nanometers is equivalent to 0.00015 meters.
2.207kg
Cupper flate 75x12mm kg/mtr
The weight of a 100x10mm galvanized iron (GI) flat per meter length can be calculated using the formula: weight (kg) = volume (m³) × density (kg/m³). The cross-sectional area of the flat is 100mm × 10mm = 1000 mm², which is 0.001 m². The density of GI is approximately 7850 kg/m³, so the weight per meter is around 7.85 kg.
The weight of 50x6 copper flat per meter can be calculated by first finding the volume of the flat bar (50mm width, 6mm thickness, and 1000mm length) in cubic millimeters, then multiplying it by the density of copper (8.96 g/cm3) to get the weight in grams per meter. Finally, convert the weight from grams to the desired unit, such as kilograms or pounds.
How can a flat area measure be in a length measure? Bananas are no apples.
1meter of 65*10 copper flat is 5.811Kgs.
The weight of a 40x5mm thick MS (mild steel) flat bar per meter can be calculated by multiplying the volume (area x length) by the density of mild steel. The area of the flat bar is 40mm x 5mm = 200mm². The volume per meter would be 200mm² x 1000mm = 200,000 mm³. The density of mild steel is around 7850 kg/m³, so the weight per meter would be 200,000 mm³ x 7850 kg/m³ = 1.57 kg/m.
To calculate the weight per meter of a 30x3 mm mild steel (MS) flat bar, you can use the formula: weight (kg/m) = (width x thickness x density) / 1000. The density of mild steel is approximately 7850 kg/m³. For a 30x3 mm flat bar, the weight per meter would be approximately 0.706 kg/m.
A meter rule is a measuring instrument typically used in science and engineering to measure length or distance in metric units. It is a long, flat, rectangular ruler usually one meter in length, with markings in centimeters and millimeters along its edge. The meter rule is a precise tool that allows for accurate measurements to be taken in various applications, such as physics experiments, construction projects, and laboratory work.
That does not make any sense because a ton is a measurement of weight and a square meter measures a flat area.
there is no formula discovered especially for the weight of flat
6 meters (length) x 3 meters (tall) = 18 meters2 There are 18 square meters.