low 50 to 60 and high 250 to 300
In a 404A refrigerant bench cooler, the typical operating pressures can vary based on the specific system design and operating conditions. However, the suction pressure usually ranges from about 10 to 30 psi, while the discharge pressure typically falls between 200 to 250 psi. It's essential to consult the manufacturer's specifications for the exact pressures optimal for the particular unit in use. Regular monitoring ensures efficient operation and helps prevent system damage.
42
18-20psig suction 250-270 psig discharge In freezers pressures are ok .I got it ,but the mention pressure of suction 18-20 discharge 250-270 at what temprature in centegrade it should be.
Mixing 404A refrigerant with R12 is not recommended, as they are incompatible and can lead to system damage, decreased efficiency, and safety hazards. R12 is a CFC refrigerant, while 404A is a blend of HFCs that operates at different pressures and thermodynamic properties. Additionally, mixing refrigerants can complicate recovery and recycling processes, making it difficult to maintain compliance with environmental regulations. It's best to use the specified refrigerant for your system.
what is suction pressure of r407a
18-20psig suction 250-270 psig discharge In freezers pressures are ok .I got it ,but the mention pressure of suction 18-20 discharge 250-270 at what temprature in centegrade it should be.
No, refrigerants cannot be blended.
R-404A is not compatible with R-12 systems due to differences in chemical composition and operating pressures. While R-404A is a hydrofluorocarbon (HFC) refrigerant, R-12 is a chlorofluorocarbon (CFC), and their properties require distinct system components. Converting an R-12 system to use R-404A typically involves replacing the compressor, expansion valve, and other components to ensure proper functionality and efficiency. Always consult a qualified technician for refrigerant conversions.
if room tem is 70f 15psi
if room tem is 70f 15psi
For a R-404A ice maker, the low side pressure typically ranges between 20 to 30 psi, while the high side pressure should be around 200 to 250 psi. These pressures can vary slightly based on the specific ice maker model and ambient conditions. Always check the manufacturer's specifications for the most accurate pressure readings. Proper monitoring is essential to ensure efficient operation and prevent potential issues.
The refrigerant pressure on an ice machine using R-404A refrigerant should typically be around 175-250 psi on the low side and 250-350 psi on the high side, depending on factors such as ambient temperature and load conditions. It's important to consult the manufacturer's specifications and guidelines for the specific ice machine model to ensure proper operation.