answersLogoWhite

0

Because iron is higher on the reactivity series meaning it can displace the copper

User Avatar

Anonymous

5y ago

What else can I help you with?

Continue Learning about Earth Science

Why can iron be used to get copper sulfate solution?

Iron is more reactive than copper, allowing it to displace copper from copper sulfate solution through a single displacement reaction. This process forms iron sulfate and solid copper metal, as iron has a higher affinity for sulfate ions than copper does.


How do you do copper coating on iron powder?

Contacting the iron powder with an aqueous solution of copper (II) salts will produce a copper coating on iron powder: Iron is higher in the electromotive series than copper and therefore will displace copper from the solution, resulting in copper-coated iron and dissolved iron cations. When all of the surface of the iron powder has been coated with copper, the iron will stop reacting because it no longer has access to the copper ions in solution, the access of the iron being blocked by the layer of copper coating the remaining iron powder.


How are magnets used in junk yards?

Rather than "permanent" magnets, the large electromagnets used in junkyards only create a magnetic field when electric current flows through them. They are used to lift iron and steel scrap, and to separate it from non-magnetic scrap. The cranes have an electric generator connected to a wire coil in the large round lifting disc. When the power is on, its magnetic field attracts heavy iron and steel to it. When the scrap is positioned where they want it, they cut the power to the electromagnet and the scrap drops. They are attached to cranes and are used to lift up heaps of scrap metal


What element used to be mined in Michigan?

Copper used to be mined in Michigan. The state was one of the leading copper-producing regions in the country during the mid-19th century.


Is iron or copper stronger?

In terms of tensile strength, iron is stronger than copper. Iron is a harder and more durable metal compared to copper, which is softer and more malleable. This difference in strength makes iron more suitable for applications where high strength and durability are required.

Related Questions

Is iron used to displace copper from solutions of its salts?

Yes, iron can displace copper from solutions of its salts through a displacement reaction. Iron has a higher reactivity than copper, so it can replace copper in the salt solution, forming iron salts and copper metal.


How scrap iron is used to displace copper from solution?

In general, any metal higher than copper in the "electromotive series" will displace copper from copper sulfate solution. This category includes all the alkali and alkaline earth metals and other common metals such as iron and zinc. For example Aluminum and Iron both displace Copper: Aluminum in Copper sulfate will trade places in the ionic balance of the solution and 'join' with the sulfate. CuSO4(aq) + Al(s) ==> AlSO4(aq) + Cu++(s) Because this single displacement reaction occurs in immediate proximity to the aluminum, Copper++ ions accumulate in a fluffy rust colored fur around the aluminum. Iron in Copper Sulfate will also go into the aqueous sulfate solution and the Copper will precipitate onto the Iron CuSO4(aq) + Fe(s) ==> FeSO4(aq) + Cu?(s) This reaction happens at the ferrous surface more intimately than the Aluminum and the Copper is deposited as a 'plate'.


Why is it economical to use scrap iron to get copper?

Well, honey, using scrap iron to get copper is economical because iron is cheaper than copper, so it's a cost-effective way to get your hands on some shiny copper without breaking the bank. Plus, recycling scrap iron is good for the environment, so you can feel like a frugal eco-warrior while you're at it. Just make sure you know what you're doing so you don't end up with a hot mess instead of a copper treasure.


Why can iron be used to get copper from copper sulfate solution?

Iron can displace copper in a chemical reaction because it is a more reactive metal. When iron is added to a copper sulfate solution, the iron atoms will replace the copper atoms in the solution, forming iron sulfate and causing copper metal to be deposited. This process is known as a displacement reaction.


Why can iron be used to get copper sulfate solution?

Iron is more reactive than copper, allowing it to displace copper from copper sulfate solution through a single displacement reaction. This process forms iron sulfate and solid copper metal, as iron has a higher affinity for sulfate ions than copper does.


Why will iron displace copper from aqueous solutions of copper salts?

Because iron is more reactive than copper. If iron displaces copper, that releases energy (enthalpy). If copper were to displace iron, that would require energy to be used. This is less favourable and , averaged over the huge number of molecules, atoms and ions in the solution, the more energy producing reaction is vastly preferred. Hence, iron put into copper sulphate solution gets coated in copper and the solution slowly loses its blue colour. But if you put copper metal in iron sulphate solution, nothing noticable occurs.


How can iron be used to get copper from copper sulfate solution?

Since iron (Fe) is more reactive than copper (Cu) it will be 'plated' with copper when the metal iron is stuck in copper sulfate solution. Fe(s) + Cu2+(aq) + [SO42-]aq ---> Fe2+(aq) + Cu(s) + [SO42-]aq


How can copper be extracted using scrap iron nothing it doesnt work that way?

Copper cannot be extracted using scrap iron because iron is less reactive than copper in the reactivity series. To extract copper from its ore, a process called electrolysis or smelting is usually used. During smelting, the copper ore is heated with carbon to remove oxygen and extract the copper metal.


How do you do copper coating on iron powder?

Contacting the iron powder with an aqueous solution of copper (II) salts will produce a copper coating on iron powder: Iron is higher in the electromotive series than copper and therefore will displace copper from the solution, resulting in copper-coated iron and dissolved iron cations. When all of the surface of the iron powder has been coated with copper, the iron will stop reacting because it no longer has access to the copper ions in solution, the access of the iron being blocked by the layer of copper coating the remaining iron powder.


What magnet is used for scrap heap magnet?

They are used everyday to move scrap iron around the scrap yard...


Why can iron be used used to get copper from copper sulfate solution?

Iron is more reactive than copper


What is an everyday use for scrap heap magnets?

They are used everyday to move scrap iron around the scrap yard...